[Thu May 17 10:04:22 2012] Detection parameters:
  Position = (300.1, 107.4) = 8 4 25.28 64 47 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.7 +/- 13.0
  Background counts = 8.8
  Rate = 0.004 +/- 0.0006

[Thu May 17 10:04:22 2012] Off-axis axis estimate = 13.85'
[Thu May 17 12:08:26 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Thu May 17 12:08:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 12:08:26 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Thu May 17 12:08:26 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.098
[Thu May 17 12:08:26 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.36"
[Thu May 17 12:42:12 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 17 12:42:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8.csv
[Thu May 17 12:42:12 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 17 12:42:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8.csv
[Thu May 17 12:42:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 12:42:12 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 17 12:42:12 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 17 12:42:12 2012] Fit fullrun_mos2_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 17 12:42:31 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 18.584970 pixels away
[Thu May 17 12:42:31 2012] Vigneting correction estimate = 1.000000
[Thu May 17 12:42:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 12:42:31 2012] Assessing source extent using major
[Thu May 17 12:42:31 2012] Source does appear to be extended
[Thu May 17 12:42:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:23:14 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Thu May 17 14:23:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 14:23:14 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Thu May 17 14:23:14 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.098
[Thu May 17 14:23:14 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.36"
[Thu May 17 14:57:02 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 17 14:57:02 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 17 14:57:02 2012] Fit fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_src8 appears to have run properly
[Thu May 17 14:57:02 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 17 14:57:02 2012] fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 17 14:57:02 2012] Fit fullrun_mos2_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu May 17 14:57:20 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 17.153602 pixels away
[Thu May 17 14:57:20 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:57:20 2012] Assessing source extent using major
[Thu May 17 14:57:20 2012] Source does appear to be extended
[Thu May 17 14:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 16:32:38 2012] XMMSAS src. selection expression = ellipse(26057.165833, 9291.011597, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 16:32:38 2012] Writing source region out to fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16_src.reg
[Thu May 17 16:32:38 2012] Extracting stamp from image fullrun_mos2_xmm0094400301_pi300-10000_cl_sm2.00.img.gz, (263, 70) - (338, 145)
[Thu May 17 16:32:39 2012] XMMSAS bgd. selection expression = annulus(26057.165833, 9291.011597, 1087.500000, 2175.000000, X, Y)
[Thu May 17 16:32:39 2012] Writing fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16.gif
[Thu May 17 16:37:56 2012] Mean detx,y = (-820.59, 14880.65) 
[Thu May 17 16:37:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 16:38:34 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 16:38:34 2012] Setting source spectrum file to fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 17 16:38:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu May 17 16:48:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 16:48:30 2012] rmf not generated due to insufficient counts
[Thu May 17 16:50:09 2012] Updating aperture counts using extracted products
[Thu May 17 16:50:09 2012] Error reading totcts from fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 17 16:50:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 16:50:09 2012] Using photon index=1.80, rate=0.0045, arf fullrun_mos2_xmm0094400301_pi300-10000_pass1_cl_src16.arf
[Thu May 17 16:50:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 16:50:10 2012] Updating source flux to 1.3e-13
[Thu May 17 16:51:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting