[Thu May 17 10:03:37 2012] Detection parameters:
  Position = (274.0, 369.1) = 8 4 43.21 65 6 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 14.7
  Background counts = 9.0
  Rate = 0.009 +/- 0.001

[Thu May 17 10:03:38 2012] Off-axis axis estimate = 5.42'
[Thu May 17 11:24:10 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:24:10 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Thu May 17 11:24:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.109
[Thu May 17 11:24:10 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.14"
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 17 12:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2.csv
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 17 12:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2.csv
[Thu May 17 12:08:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 17 12:08:26 2012] Fit fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 17 12:42:27 2012] Spatial fit model total counts = 211.853000, observed total counts = 213.000000
[Thu May 17 12:42:27 2012] Offset between fit and detection position for source 3 = 0.192328 pixels
[Thu May 17 12:42:27 2012] 207.855900 total counts/ 94.839900 bgd. counts: snr = 11.604980
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.192328 pixels
  Position = (273.8, 369.1) = 8 4 43.35 65 6 28.7
  Extent = 6.8 (5.1-8.4)", rotation angle = 0
  Source counts = 113.0 +/- 14.4
  Background counts = 94.8
  Rate = 0.005 +/- 0.0006
[Thu May 17 12:42:27 2012] Vigneting correction estimate = 1.000000
[Thu May 17 12:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 12:42:27 2012] Assessing source extent using major axis lower bound
[Thu May 17 12:42:27 2012] Source does appear to be extended
[Thu May 17 12:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:43:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 13:43:53 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Thu May 17 13:43:53 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Thu May 17 13:43:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.78"
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2.csv
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2.csv
[Thu May 17 14:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 14:23:14 2012] Fit fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 17 14:57:16 2012] Spatial fit model total counts = 211.854000, observed total counts = 213.000000
[Thu May 17 14:57:16 2012] Offset between fit and detection position for source 3 = 0.000494 pixels
[Thu May 17 14:57:16 2012] 207.854600 total counts/ 94.905600 bgd. counts: snr = 11.594085
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000494 pixels
  Position = (273.8, 369.1) = 8 4 43.35 65 6 28.7
  Extent = 6.8 (5.1-8.4)", rotation angle = 0
  Source counts = 112.9 +/- 14.4
  Background counts = 94.9
  Rate = 0.005 +/- 0.0006
[Thu May 17 14:57:16 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:57:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:57:16 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:57:16 2012] Source does appear to be extended
[Thu May 17 14:57:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 16:04:35 2012] XMMSAS src. selection expression = ellipse(23774.297600, 32062.925200, 406.438238, 406.438238, 0.000000, X, Y)
[Thu May 17 16:04:35 2012] Writing source region out to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3_src.reg
[Thu May 17 16:04:35 2012] Extracting stamp from image fullrun_mos1_xmm0094400301_pi300-10000_cl_sm2.00.img.gz, (250, 346) - (297, 392)
[Thu May 17 16:04:35 2012] XMMSAS bgd. selection expression = annulus(23774.297600, 32062.925200, 677.397064, 1354.794127, X, Y)
[Thu May 17 16:04:35 2012] Writing fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3.gif
[Thu May 17 16:05:05 2012] Mean detx,y = (-7784.35, -67.96) 
[Thu May 17 16:05:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 16:05:30 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 16:05:30 2012] Setting source spectrum file to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 16:05:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 17 16:50:06 2012] Updating aperture counts using extracted products
[Thu May 17 16:50:06 2012] Error reading totcts from fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 16:50:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 16:50:08 2012] Using photon index=1.80, rate=0.005, arf fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src3.arf
[Thu May 17 16:50:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 16:50:08 2012] Updating source flux to 7.6e-14