[Thu May 17 10:03:38 2012] Detection parameters:
  Position = (373.0, 273.1) = 8 3 35.21 64 59 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.5 +/- 8.3
  Background counts = 9.8
  Rate = 0.002 +/- 0.0006

[Thu May 17 10:03:38 2012] Off-axis axis estimate = 5.71'
[Thu May 17 11:24:10 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:24:10 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Thu May 17 11:24:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.297
[Thu May 17 11:24:10 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.29"
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 17 12:08:26 2012] Fit fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_src14 appears to have run properly
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 17 12:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 17 12:08:26 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 17 12:08:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 17 12:08:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094400301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 12:42:27 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.454561 pixels away
[Thu May 17 12:42:27 2012] Vigneting correction estimate = 1.000000
[Thu May 17 12:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 12:42:27 2012] Assessing source extent using major
[Thu May 17 12:42:27 2012] Source does appear to be extended
[Thu May 17 12:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:43:53 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:43:53 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Thu May 17 13:43:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.297
[Thu May 17 13:43:53 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.29"
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13.ximg exists
[Thu May 17 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13.csv
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May 17 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13.csv
[Thu May 17 14:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May 17 14:23:14 2012] fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May 17 14:23:14 2012] Fit fullrun_mos1_xmm0094400301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu May 17 14:57:16 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 65.150432 pixels away
[Thu May 17 14:57:16 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 71.643157 pixels away
[Thu May 17 14:57:16 2012] Spatial fit model total counts = 128.915000, observed total counts = 128.000000
[Thu May 17 14:57:16 2012] Offset between fit and detection position for source 10 = 1.842995 pixels
[Thu May 17 14:57:16 2012] 136.610100 total counts/ 86.134200 bgd. counts: snr = 5.438714
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.842995 pixels
  Position = (371.2, 273.4) = 8 3 36.45 64 59 32.0
  Extent = 10.0 (6.6-15.9)", rotation angle = 0
  Source counts = 50.5 +/- 11.7
  Background counts = 86.1
  Rate = 0.002 +/- 0.0005
[Thu May 17 14:57:16 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:57:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:57:16 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:57:16 2012] Source does appear to be extended
[Thu May 17 14:57:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 16:04:35 2012] XMMSAS src. selection expression = ellipse(32248.887000, 23738.018600, 598.255217, 598.255217, 0.000000, X, Y)
[Thu May 17 16:04:35 2012] Writing source region out to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10_src.reg
[Thu May 17 16:04:35 2012] Extracting stamp from image fullrun_mos1_xmm0094400301_pi300-10000_cl_sm2.00.img.gz, (337, 239) - (406, 308)
[Thu May 17 16:04:35 2012] XMMSAS bgd. selection expression = annulus(32248.887000, 23738.018600, 997.092029, 1994.184057, X, Y)
[Thu May 17 16:04:35 2012] Writing fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10.gif
[Thu May 17 16:10:10 2012] Mean detx,y = (1622.35, -7427.65) 
[Thu May 17 16:10:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 16:10:28 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 16:10:28 2012] Setting source spectrum file to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 17 16:10:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 17 16:31:40 2012] Not generating rmf since there are only 50 counts
[Thu May 17 16:31:40 2012] rmf not generated due to insufficient counts
[Thu May 17 16:50:07 2012] Updating aperture counts using extracted products
[Thu May 17 16:50:07 2012] Error reading totcts from fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 17 16:50:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 16:50:08 2012] Using photon index=1.80, rate=0.00224, arf fullrun_mos1_xmm0094400301_pi300-10000_pass1_cl_src10.arf
[Thu May 17 16:50:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 16:50:08 2012] Updating source flux to 3.4e-14
[Thu May 17 16:50:11 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting