[Fri Jun 15 16:44:49 2012] Detection parameters:
  Position = (311.8, 278.9) = 19 59 59.95 65 8 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83660.7 +/- 342.5
  Background counts = 30.5
  Rate = 1e+01 +/- 0.05

[Fri Jun 15 16:44:49 2012] Off-axis axis estimate = 1.72'
[Fri Jun 15 17:06:32 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:06:32 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 15 17:06:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Jun 15 17:06:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 17:15:48 2012] Fit fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:15:52 2012] Spatial fit model total counts = 44463.700000, observed total counts = 43142.000000
[Fri Jun 15 17:15:52 2012] Offset between fit and detection position for source 3 = 0.081918 pixels
[Fri Jun 15 17:15:52 2012] 44149.400000 total counts/ 10479.400000 bgd. counts: snr = 328.908356
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.081918 pixels
  Position = (311.8, 278.8) = 19 59 59.95 65 8 54.3
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 33670.0 +/- 210.1
  Background counts = 10479.4
  Rate = 8 +/- 0.05
[Fri Jun 15 17:15:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:15:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:15:52 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:15:52 2012] Source does appear to be extended
[Fri Jun 15 17:15:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:10:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:10:17 2012] Initial guess for spatial extent in simple fitting = 5.62"
[Fri Jun 15 21:10:17 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.246
[Fri Jun 15 21:10:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.62"
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 21:19:34 2012] Fit fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 21:19:34 2012] Fit fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 21:19:37 2012] Spatial fit model total counts = 44450.900000, observed total counts = 43049.000000
[Fri Jun 15 21:19:37 2012] Offset between fit and detection position for source 3 = 0.004413 pixels
[Fri Jun 15 21:19:37 2012] 44343.600000 total counts/ 10394.700000 bgd. counts: snr = 332.981210
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004413 pixels
  Position = (311.8, 278.8) = 19 59 59.95 65 8 54.3
  Extent = 5.9 (5.9-6.0)" x 5.4 (5.3-5.4)", rotation angle = 111 (107-116) degrees
  Source counts = 33948.9 +/- 210.6
  Background counts = 10394.7
  Rate = 9 +/- 0.05
[Fri Jun 15 21:19:37 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:19:37 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:19:37 2012] Source does appear to be extended
[Fri Jun 15 21:19:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Fri Jun 15 21:53:18 2012] Counts = 33948.900000, rescaling region sizes by 3.000000
[Fri Jun 15 21:53:18 2012] XMMSAS src. selection expression = ellipse(27081.604100, 24206.404120, 1067.904031, 971.121628, 111.010100, X, Y)
[Fri Jun 15 21:53:18 2012] Writing source region out to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 21:53:18 2012] Extracting stamp from image fullrun_mos2_xmm0094383501_pi300-10000_cl_sm2.00.img.gz, (250, 217) - (373, 340)
[Fri Jun 15 21:53:18 2012] XMMSAS bgd. selection expression = annulus(27081.604100, 24206.404120, 5339.520154, 10679.040307, X, Y) && !ellipse(26208.924652, 23602.341675, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 21:53:18 2012] Writing fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 21:53:22 2012] Mean detx,y = (32.74, 76.78) 
[Fri Jun 15 21:53:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:56:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:56:36 2012] Setting source spectrum file to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 21:56:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 22:06:12 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:06:12 2012] Error reading totcts from fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 22:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:06:12 2012] Using photon index=1.80, rate=8.53, arf fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 22:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:06:12 2012] Updating source flux to 8.7e-11
[Fri Jun 15 22:06:47 2012] Reading fit data from xmm0094383501/analysis//spectral/fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jun 15 22:06:47 2012] Spectral fit parameter nH value = 1.28956e+21
[Fri Jun 15 22:06:47 2012] Spectral fit parameter PhoIndex value = 2.13179
[Fri Jun 15 22:06:47 2012] Failed to get F(0.3-8.0) from xmm0094383501/analysis//spectral/fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 22:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:06:47 2012] Using Nh = 1.3e+21, photon index=2.13, rate=8.53, arf fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 22:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:06:47 2012] Updating source flux to 8.3e-11