[Fri Jun 15 16:44:49 2012] Detection parameters:
  Position = (301.8, 271.8) = 20 0 6.87 65 8 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.6 +/- 24.8
  Background counts = 29.3
  Rate = 0.05 +/- 0.005

[Fri Jun 15 16:44:49 2012] Off-axis axis estimate = 1.94'
[Fri Jun 15 17:06:32 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:06:32 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jun 15 17:06:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.671
[Fri Jun 15 17:06:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.40"
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 17:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 17:15:48 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 15 17:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 17:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:15:52 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Fri Jun 15 17:15:52 2012] Source 1 is offset by 4.662214 and -8.003981 pixels which is larger than
2 X fitted extent = 1.106593 x 1.106593, not incorporating fit results
[Fri Jun 15 17:15:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:15:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:15:52 2012] Assessing source extent using major
[Fri Jun 15 17:15:52 2012] Source does appear to be extended
[Fri Jun 15 17:15:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:10:17 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:10:17 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jun 15 21:10:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.671
[Fri Jun 15 21:10:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.40"
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 15 21:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 15 21:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 15 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 21:19:34 2012] fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 15 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:19:37 2012] Source 1 is offset by 3.997364 and 0.374645 pixels which is larger than
2 X fitted extent = 3.425669 x 6.804690, not incorporating fit results
[Fri Jun 15 21:19:37 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:19:37 2012] Assessing source extent using major
[Fri Jun 15 21:19:37 2012] Source does appear to be extended
[Fri Jun 15 21:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:53:18 2012] XMMSAS src. selection expression = ellipse(26208.924652, 23602.341675, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 21:53:18 2012] Writing source region out to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 21:53:18 2012] Extracting stamp from image fullrun_mos2_xmm0094383501_pi300-10000_cl_sm2.00.img.gz, (264, 234) - (339, 309)
[Fri Jun 15 21:53:18 2012] XMMSAS bgd. selection expression = annulus(26208.924652, 23602.341675, 1087.500000, 2175.000000, X, Y) && !ellipse(27081.604100, 24206.404120, 1423.872041, 1294.828837, 111.010100, X, Y)
[Fri Jun 15 21:53:18 2012] Writing fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 21:56:39 2012] Mean detx,y = (-554.51, -372.37) 
[Fri Jun 15 21:56:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:56:56 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:56:56 2012] Setting source spectrum file to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 21:56:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 22:00:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 22:00:32 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:06:12 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:06:12 2012] Error reading totcts from fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:06:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:06:12 2012] Using photon index=1.80, rate=0.0466, arf fullrun_mos2_xmm0094383501_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:06:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:06:12 2012] Updating source flux to 5.3e-13
[Fri Jun 15 22:06:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting