[Sat May 25 01:26:17 2013] Detection parameters:
  Position = (324.9, 311.9) = 1 48 27.54 14 2 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.9 +/- 23.0
  Background counts = 40.8
  Rate = 0.07 +/- 0.006

[Sat May 25 01:26:17 2013] Off-axis axis estimate = 2.15'
[Sat May 25 01:28:57 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sat May 25 01:28:57 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Sat May 25 01:28:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Sat May 25 01:28:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.50"
[Sat May 25 01:41:52 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 25 01:41:52 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 25 01:41:52 2013] Fit fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat May 25 01:41:52 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 25 01:41:52 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 25 01:41:52 2013] Fit fullrun_pn_xmm0094383401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 25 02:10:46 2013] Spatial fit model total counts = 952.913000, observed total counts = 898.000000
[Sat May 25 02:10:46 2013] Offset between fit and detection position for source 1 = 0.174843 pixels
[Sat May 25 02:10:46 2013] 949.850000 total counts/ 651.069000 bgd. counts: snr = 11.709530
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.174843 pixels
  Position = (324.9, 312.1) = 1 48 27.55 14 2 16.1
  Extent = 11.5 (9.2-15.0)", rotation angle = 0
  Source counts = 298.8 +/- 30.8
  Background counts = 651.1
  Rate = 0.05 +/- 0.006
[Sat May 25 02:10:46 2013] Vigneting correction estimate = 1.000000
[Sat May 25 02:10:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 02:10:46 2013] Assessing source extent using major axis lower bound
[Sat May 25 02:10:46 2013] Source does appear to be extended
[Sat May 25 02:10:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 02:10:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 02:10:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 02:10:59 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Sat May 25 02:10:59 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Sat May 25 02:10:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.48"
[Sat May 25 02:18:09 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 25 02:18:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1.csv
[Sat May 25 02:18:09 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 25 02:18:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1.csv
[Sat May 25 02:18:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 02:18:09 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 25 02:18:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 25 02:18:09 2013] fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 25 02:18:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 25 02:18:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094383401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 02:48:27 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Sat May 25 02:48:27 2013] Vigneting correction estimate = 1.000000
[Sat May 25 02:48:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 02:48:27 2013] Assessing source extent using major axis lower bound
[Sat May 25 02:48:27 2013] Source does appear to be extended
[Sat May 25 02:48:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 02:48:40 2013] XMMSAS src. selection expression = ellipse(28214.257400, 27102.144200, 688.974020, 688.974020, 0.000000, X, Y)
[Sat May 25 02:48:40 2013] Writing source region out to fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_src.reg
[Sat May 25 02:48:40 2013] Extracting stamp from image fullrun_pn_xmm0094383401_pi300-10000_cl_sm2.00.img.gz, (285, 272) - (364, 352)
[Sat May 25 02:48:40 2013] XMMSAS bgd. selection expression = annulus(28214.257400, 27102.144200, 1148.290033, 2296.580066, X, Y) && !ellipse(28933.616608, 26595.783661, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 02:48:40 2013] Writing fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1.gif
[Sat May 25 02:49:41 2013] Mean detx,y = (682.58, -415.02) 
[Sat May 25 02:49:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 02:50:00 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 02:50:00 2013] Setting source spectrum file to fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 25 02:50:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 25 03:25:56 2013] Updating aperture counts using extracted products
[Sat May 25 03:25:56 2013] Total counts from fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 794.00
[Sat May 25 03:25:56 2013] Total counts from fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1072.00
[Sat May 25 03:25:56 2013] Got source and background scale factors 1404614.000000, 6581699.000000
[Sat May 25 03:25:56 2013] User source parameters:
  Position = (324.9, 312.1) = 1 48 27.55 14 2 16.1
  Extent = 11.5 (9.2-15.0)", rotation angle = 0
  Source aperture counts = 565.2 +/- 29.2
  Background aperture counts = 228.8
  Rate = 0.1 +/- 0.005

[Sat May 25 03:25:57 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:25:57 2013] Using photon index=1.80, rate=0.0543, arf fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1.arf
[Sat May 25 03:25:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:25:57 2013] Updating source flux to 1.5e-13
[Sat May 25 03:26:09 2013] xmm0094383401/analysis//spectral/fullrun_pn_xmm0094383401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete