[Sun Jul 29 07:04:57 2012] Detection parameters:
  Position = (170.8, 256.2) = 12 58 12.09 24 11 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.2 +/- 6.0
  Background counts = 1.5
  Rate = 0.007 +/- 0.002

[Sun Jul 29 07:04:57 2012] Off-axis axis estimate = 9.75'
[Sun Jul 29 07:18:53 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 07:18:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 07:18:53 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Sun Jul 29 07:18:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Sun Jul 29 07:18:53 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.30"
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 29 07:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 29 07:32:51 2012] Fit fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jul 29 07:32:55 2012] Spatial fit model total counts = 39.025900, observed total counts = 39.000000
[Sun Jul 29 07:32:55 2012] Offset between fit and detection position for source 6 = 0.037897 pixels
[Sun Jul 29 07:32:55 2012] 39.753200 total counts/ 24.029800 bgd. counts: snr = 3.207535
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.037897 pixels
  Position = (170.9, 256.2) = 12 58 12.08 24 11 18.9
  Extent = 3.2 (2.8-4.3)", rotation angle = 0
  Source counts = 15.7 +/- 6.3
  Background counts = 24.0
  Rate = 0.003 +/- 0.001
[Sun Jul 29 07:32:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 07:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 07:32:55 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 07:32:55 2012] Source does appear to be extended
[Sun Jul 29 07:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:35:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 07:35:36 2012] Initial guess for spatial extent in simple fitting = 3.20"
[Sun Jul 29 07:35:36 2012] source mask rpix=0.7, npix_max = 6, mask sum = 4, frac = 0.656
[Sun Jul 29 07:35:36 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.20"
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 29 07:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2.csv
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 29 07:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2.csv
[Sun Jul 29 07:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 29 07:47:04 2012] Fit fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jul 29 07:47:06 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Sun Jul 29 07:47:06 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 07:47:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 07:47:06 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 07:47:06 2012] Source does appear to be extended
[Sun Jul 29 07:47:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:47:06 2012] Deleting source due to low Poisson probability 0.8