[Sun Jul 29 07:04:56 2012] Detection parameters:
  Position = (297.0, 275.0) = 12 57 31.96 24 12 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7411.3 +/- 102.3
  Background counts = 2.0
  Rate = 1 +/- 0.02

[Sun Jul 29 07:04:57 2012] Off-axis axis estimate = 1.70'
[Sun Jul 29 07:18:53 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 07:18:53 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jul 29 07:18:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jul 29 07:18:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 07:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 07:32:51 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 29 07:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:32:55 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.146735 pixels away
[Sun Jul 29 07:32:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 07:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 07:32:55 2012] Assessing source extent using major
[Sun Jul 29 07:32:55 2012] Source does appear to be extended
[Sun Jul 29 07:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:35:36 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 07:35:36 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jul 29 07:35:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jul 29 07:35:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 07:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 07:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 07:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 07:47:04 2012] fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 07:47:04 2012] Fit fullrun_mos2_xmm0094383201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 29 07:47:06 2012] Spatial fit model total counts = 6673.720000, observed total counts = 6499.000000
[Sun Jul 29 07:47:06 2012] Offset between fit and detection position for source 1 = 0.057984 pixels
[Sun Jul 29 07:47:06 2012] 6652.500000 total counts/ 1569.330000 bgd. counts: snr = 128.315020
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057984 pixels
  Position = (297.1, 275.0) = 12 57 31.94 24 12 41.1
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 5083.2 +/- 81.6
  Background counts = 1569.3
  Rate = 0.9 +/- 0.01
[Sun Jul 29 07:47:06 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 07:47:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 07:47:06 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 07:47:06 2012] Source does appear to be extended
[Sun Jul 29 07:47:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:57:45 2012] Counts = 5083.170000, rescaling region sizes by 2.000000
[Sun Jul 29 07:57:45 2012] XMMSAS src. selection expression = ellipse(25799.797600, 23879.459200, 631.030818, 631.030818, 0.000000, X, Y)
[Sun Jul 29 07:57:45 2012] Writing source region out to fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 29 07:57:45 2012] Extracting stamp from image fullrun_mos2_xmm0094383201_pi300-10000_cl_sm2.00.img.gz, (261, 239) - (333, 311)
[Sun Jul 29 07:57:45 2012] XMMSAS bgd. selection expression = annulus(25799.797600, 23879.459200, 2103.436061, 4206.872121, X, Y)
[Sun Jul 29 07:57:45 2012] Writing fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 29 07:57:47 2012] Mean detx,y = (30.86, 46.90) 
[Sun Jul 29 07:57:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 07:58:10 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 07:58:10 2012] Setting source spectrum file to fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 07:58:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 08:01:51 2012] Updating aperture counts using extracted products
[Sun Jul 29 08:01:51 2012] Error reading totcts from fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 08:01:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 08:01:51 2012] Using photon index=1.80, rate=0.854, arf fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 08:01:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 08:01:51 2012] Updating source flux to 9.5e-12
[Sun Jul 29 08:02:09 2012] Reading fit data from xmm0094383201/analysis//spectral/fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 08:02:09 2012] Spectral fit parameter nH value = 2.21008e+20
[Sun Jul 29 08:02:09 2012] Spectral fit parameter PhoIndex value = 2.09611
[Sun Jul 29 08:02:09 2012] Failed to get F(0.3-8.0) from xmm0094383201/analysis//spectral/fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 08:02:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 08:02:09 2012] Using Nh = 2.2e+20, photon index=2.10, rate=0.854, arf fullrun_mos2_xmm0094383201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 08:02:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 08:02:09 2012] Updating source flux to 8.6e-12