[Sun Jul 29 07:04:38 2012] Detection parameters:
  Position = (487.5, 235.0) = 12 56 31.42 24 9 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.0 +/- 5.6
  Background counts = 0.7
  Rate = 0.004 +/- 0.0009

[Sun Jul 29 07:04:38 2012] Off-axis axis estimate = 14.46'
[Sun Jul 29 07:10:56 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 07:10:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 07:10:56 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Sun Jul 29 07:10:56 2012] source mask rpix=3.1, npix_max = 52, mask sum = 33, frac = 0.623
[Sun Jul 29 07:10:56 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.66"
[Sun Jul 29 07:18:53 2012] fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jul 29 07:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4.csv
[Sun Jul 29 07:18:53 2012] fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jul 29 07:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4.csv
[Sun Jul 29 07:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:18:53 2012] fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul 29 07:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 29 07:18:53 2012] fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul 29 07:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 29 07:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094383201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 07:32:53 2012] Spatial fit model total counts = 108.716000, observed total counts = 27.000000
[Sun Jul 29 07:32:53 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 07:32:53 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 07:32:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 07:32:53 2012] Assessing source extent using major
[Sun Jul 29 07:32:53 2012] Source does appear to be extended
[Sun Jul 29 07:32:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:32:53 2012] Deleting source due to low Poisson probability 0.9