[Fri Jun 15 23:11:11 2012] Detection parameters:
  Position = (276.7, 320.5) = 10 31 25.47 50 56 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.3 +/- 8.9
  Background counts = 12.6
  Rate = 0.01 +/- 0.003

[Fri Jun 15 23:11:11 2012] Off-axis axis estimate = 2.24'
[Fri Jun 15 23:13:09 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:13:09 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Fri Jun 15 23:13:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Fri Jun 15 23:13:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.55"
[Fri Jun 15 23:44:15 2012] fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 23:44:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 23:44:15 2012] fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 23:44:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 23:44:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:44:15 2012] fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 23:44:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 23:44:15 2012] fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 23:44:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 23:44:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:11:46 2012] Spatial fit model total counts = -368.390000, observed total counts = 153.000000
[Sat Jun 16 00:11:46 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 16 00:11:46 2012] Source 1 is offset by -0.316062 and 3.032191 pixels which is larger than
2 X fitted extent = 0.832326 x 0.832326, not incorporating fit results
[Sat Jun 16 00:11:46 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:11:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:11:46 2012] Assessing source extent using major
[Sat Jun 16 00:11:46 2012] Source does appear to be extended
[Sat Jun 16 00:11:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:11:46 2012] Deleting source due to low Poisson probability 0.7