[Fri Jun 15 23:11:47 2012] Detection parameters:
  Position = (280.6, 279.0) = 10 31 23.68 50 53 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 13.2
  Background counts = 3.5
  Rate = 0.02 +/- 0.003

[Fri Jun 15 23:11:47 2012] Off-axis axis estimate = 1.91'
[Fri Jun 15 23:55:31 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:55:31 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Fri Jun 15 23:55:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.673
[Fri Jun 15 23:55:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.38"
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 00:11:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 16 00:11:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:11:49 2012] Warning, spatial fit 5 centroid is now closest to src. 7
[Sat Jun 16 00:11:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:11:49 2012] Assessing source extent using major
[Sat Jun 16 00:11:49 2012] Source does appear to be extended
[Sat Jun 16 00:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:25:44 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 00:25:44 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Jun 16 00:25:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.673
[Sat Jun 16 00:25:44 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.38"
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 00:34:15 2012] Fit fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 00:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 00:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 16 00:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:34:19 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.758703 pixels away
[Sat Jun 16 00:34:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:34:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:34:19 2012] Assessing source extent using major
[Sat Jun 16 00:34:19 2012] Source does appear to be extended
[Sat Jun 16 00:34:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 01:10:03 2012] XMMSAS src. selection expression = ellipse(24364.826263, 24223.167175, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 16 01:10:03 2012] Writing source region out to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 16 01:10:03 2012] Extracting stamp from image fullrun_mos2_xmm0094382701_pi300-10000_cl_sm2.00.img.gz, (243, 241) - (318, 316)
[Sat Jun 16 01:10:03 2012] XMMSAS bgd. selection expression = annulus(24364.826263, 24223.167175, 1087.500000, 2175.000000, X, Y) && !ellipse(25350.753780, 23943.229800, 1266.324036, 1266.324036, 0.000000, X, Y)
[Sat Jun 16 01:10:03 2012] Writing fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6.gif
[Sat Jun 16 01:12:58 2012] Mean detx,y = (-530.35, -361.38) 
[Sat Jun 16 01:12:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 01:13:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 01:13:13 2012] Setting source spectrum file to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 01:13:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 16 01:23:48 2012] Not generating rmf since there are only 72 counts
[Sat Jun 16 01:23:48 2012] rmf not generated due to insufficient counts
[Sat Jun 16 01:29:41 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:29:41 2012] Error reading totcts from fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 01:29:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:29:41 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src6.arf
[Sat Jun 16 01:29:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:29:41 2012] Updating source flux to 1.8e-13
[Sat Jun 16 01:30:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting