[Fri Jun 15 23:11:46 2012] Detection parameters:
  Position = (291.9, 275.9) = 10 31 18.50 50 53 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22224.7 +/- 177.0
  Background counts = 3.2
  Rate = 4 +/- 0.03

[Fri Jun 15 23:11:47 2012] Off-axis axis estimate = 1.70'
[Fri Jun 15 23:55:31 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:55:31 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 23:55:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jun 15 23:55:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 00:11:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 00:11:45 2012] Fit fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 00:11:49 2012] Spatial fit model total counts = 20071.500000, observed total counts = 19288.000000
[Sat Jun 16 00:11:49 2012] Offset between fit and detection position for source 3 = 0.111425 pixels
[Sat Jun 16 00:11:49 2012] 19919.800000 total counts/ 4768.000000 bgd. counts: snr = 219.430052
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111425 pixels
  Position = (291.9, 275.8) = 10 31 18.47 50 53 36.9
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 15151.8 +/- 141.1
  Background counts = 4768.0
  Rate = 3 +/- 0.02
[Sat Jun 16 00:11:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:11:49 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 00:11:49 2012] Source does appear to be extended
[Sat Jun 16 00:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:25:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 00:25:44 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Sat Jun 16 00:25:44 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.027
[Sat Jun 16 00:25:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.26"
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 00:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 00:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 00:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 00:34:15 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 00:34:15 2012] Fit fullrun_mos2_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 00:34:19 2012] Spatial fit model total counts = 20089.500000, observed total counts = 19299.000000
[Sat Jun 16 00:34:19 2012] Offset between fit and detection position for source 3 = 0.016397 pixels
[Sat Jun 16 00:34:19 2012] 20050.620000 total counts/ 4849.620000 bgd. counts: snr = 218.282191
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.016397 pixels
  Position = (291.9, 275.8) = 10 31 18.47 50 53 36.8
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 15201.0 +/- 141.6
  Background counts = 4849.6
  Rate = 3 +/- 0.02
[Sat Jun 16 00:34:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:34:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:34:19 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 00:34:19 2012] Source does appear to be extended
[Sat Jun 16 00:34:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 01:10:03 2012] Counts = 15201.000000, rescaling region sizes by 3.000000
[Sat Jun 16 01:10:03 2012] XMMSAS src. selection expression = ellipse(25350.753780, 23943.229800, 949.743027, 949.743027, 0.000000, X, Y)
[Sat Jun 16 01:10:03 2012] Writing source region out to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 16 01:10:03 2012] Extracting stamp from image fullrun_mos2_xmm0094382701_pi300-10000_cl_sm2.00.img.gz, (237, 221) - (347, 330)
[Sat Jun 16 01:10:03 2012] XMMSAS bgd. selection expression = annulus(25350.753780, 23943.229800, 4748.715137, 9497.430273, X, Y) && !ellipse(15433.271060, 23673.652600, 502.414992, 502.414992, 0.000000, X, Y) && !ellipse(24364.826263, 24223.167175, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 01:10:03 2012] Writing fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3.gif
[Sat Jun 16 01:10:06 2012] Mean detx,y = (20.85, 50.67) 
[Sat Jun 16 01:10:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 01:12:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 01:12:30 2012] Setting source spectrum file to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 01:12:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 01:29:41 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:29:41 2012] Error reading totcts from fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 01:29:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:29:41 2012] Using photon index=1.80, rate=2.62, arf fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 01:29:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:29:41 2012] Updating source flux to 2.8e-11
[Sat Jun 16 01:30:32 2012] Reading fit data from xmm0094382701/analysis//spectral/fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jun 16 01:30:32 2012] Spectral fit parameter nH value = 4.36773e+20
[Sat Jun 16 01:30:32 2012] Spectral fit parameter PhoIndex value = 2.48826
[Sat Jun 16 01:30:32 2012] Failed to get F(0.3-8.0) from xmm0094382701/analysis//spectral/fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 01:30:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:30:32 2012] Using Nh = 4.4e+20, photon index=2.49, rate=2.62, arf fullrun_mos2_xmm0094382701_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 01:30:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:30:32 2012] Updating source flux to 2.2e-11