[Fri Jun 15 23:11:47 2012] Detection parameters: Position = (329.3, 98.8) = 10 31 1.38 50 40 47.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.2 +/- 9.7 Background counts = 1.5 Rate = 0.01 +/- 0.002 [Fri Jun 15 23:11:47 2012] Off-axis axis estimate = 14.64' [Fri Jun 15 23:55:31 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting [Fri Jun 15 23:55:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 15 23:55:31 2012] Initial guess for spatial extent in simple fitting = 13.75" [Fri Jun 15 23:55:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 47, frac = 0.877 [Fri Jun 15 23:55:31 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.75" [Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6.ximg exists [Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6.csv [Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6_1.ximg exists [Sat Jun 16 00:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6.csv [Sat Jun 16 00:11:45 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sat Jun 16 00:11:45 2012] fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sat Jun 16 00:11:45 2012] Fit fullrun_mos2_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Sat Jun 16 00:11:49 2012] Spatial fit model total counts = 78.965300, observed total counts = 76.000000 [Sat Jun 16 00:11:49 2012] Offset between fit and detection position for source 11 = 0.297451 pixels [Sat Jun 16 00:11:49 2012] 78.310100 total counts/ 37.110400 bgd. counts: snr = 6.763107 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.297451 pixels Position = (329.0, 99.0) = 10 31 1.49 50 40 47.9 Extent = 6.6 (4.4-8.6)", rotation angle = 0 Source counts = 41.2 +/- 8.8 Background counts = 37.1 Rate = 0.007 +/- 0.002 [Sat Jun 16 00:11:49 2012] Vigneting correction estimate = 1.000000 [Sat Jun 16 00:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 16 00:11:49 2012] Assessing source extent using major axis lower bound [Sat Jun 16 00:11:49 2012] Source does appear to be extended [Sat Jun 16 00:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 16 00:11:49 2012] Deleting source due to low Poisson probability 0.9