[Fri Jun 15 23:11:28 2012] Detection parameters:
  Position = (261.7, 147.0) = 10 31 32.34 50 44 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.9 +/- 14.1
  Background counts = 1.6
  Rate = 0.02 +/- 0.002

[Fri Jun 15 23:11:29 2012] Off-axis axis estimate = 11.30'
[Fri Jun 15 23:44:15 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 23:44:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 23:44:15 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Fri Jun 15 23:44:15 2012] source mask rpix=2.8, npix_max = 42, mask sum = 33, frac = 0.768
[Fri Jun 15 23:44:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.08"
[Fri Jun 15 23:55:30 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 23:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 23:55:30 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 23:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 23:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:55:31 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 23:55:31 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 23:55:31 2012] Fit fullrun_mos1_xmm0094382701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 16 00:11:48 2012] Spatial fit model total counts = 146.858000, observed total counts = 137.000000
[Sat Jun 16 00:11:48 2012] Offset between fit and detection position for source 2 = 0.504227 pixels
[Sat Jun 16 00:11:48 2012] 149.105100 total counts/ 48.878100 bgd. counts: snr = 14.335986
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.504227 pixels
  Position = (262.2, 146.9) = 10 31 32.11 50 44 16.2
  Extent = 4.9 (4.0-5.8)", rotation angle = 0
  Source counts = 100.2 +/- 12.2
  Background counts = 48.9
  Rate = 0.02 +/- 0.002
[Sat Jun 16 00:11:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:11:48 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 00:11:48 2012] Source does appear to be extended
[Sat Jun 16 00:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:14:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 00:14:49 2012] Initial guess for spatial extent in simple fitting = 4.91"
[Sat Jun 16 00:14:49 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.129
[Sat Jun 16 00:14:49 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.91"
[Sat Jun 16 00:25:44 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 16 00:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 00:25:44 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 16 00:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 00:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 00:25:44 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 16 00:25:44 2012] fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 16 00:25:44 2012] Fit fullrun_mos1_xmm0094382701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 16 00:34:18 2012] Spatial fit model total counts = 141.020000, observed total counts = 135.000000
[Sat Jun 16 00:34:18 2012] Offset between fit and detection position for source 2 = 0.026895 pixels
[Sat Jun 16 00:34:18 2012] 143.882900 total counts/ 43.892300 bgd. counts: snr = 15.092633
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.026895 pixels
  Position = (262.1, 146.9) = 10 31 32.12 50 44 16.3
  Extent = 4.9 (4.0-5.9)", rotation angle = 0
  Source counts = 100.0 +/- 12.0
  Background counts = 43.9
  Rate = 0.02 +/- 0.002
[Sat Jun 16 00:34:18 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 00:34:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 00:34:18 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 00:34:18 2012] Source does appear to be extended
[Sat Jun 16 00:34:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 00:50:43 2012] XMMSAS src. selection expression = ellipse(22758.041740, 12734.049000, 292.730408, 292.730408, 0.000000, X, Y)
[Sat Jun 16 00:50:43 2012] Writing source region out to fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 16 00:50:43 2012] Extracting stamp from image fullrun_mos1_xmm0094382701_pi300-10000_cl_sm2.00.img.gz, (245, 130) - (279, 164)
[Sat Jun 16 00:50:43 2012] XMMSAS bgd. selection expression = annulus(22758.041740, 12734.049000, 487.884014, 975.768028, X, Y)
[Sat Jun 16 00:50:43 2012] Writing fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2.gif
[Sat Jun 16 00:53:55 2012] Mean detx,y = (10000.07, 5956.50) 
[Sat Jun 16 00:53:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 00:54:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 00:54:08 2012] Setting source spectrum file to fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 00:54:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 16 01:09:51 2012] Not generating rmf since there are only 99 counts
[Sat Jun 16 01:09:51 2012] rmf not generated due to insufficient counts
[Sat Jun 16 01:29:41 2012] Updating aperture counts using extracted products
[Sat Jun 16 01:29:41 2012] Error reading totcts from fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 01:29:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 01:29:41 2012] Using photon index=1.80, rate=0.0172, arf fullrun_mos1_xmm0094382701_pi300-10000_pass1_cl_src2.arf
[Sat Jun 16 01:29:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 01:29:41 2012] Updating source flux to 4.4e-13
[Sat Jun 16 01:29:42 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting