[Thu Sep 22 22:12:25 2011] Detection parameters:
  Position = (189.1, 271.5) = 1 23 53.22 34 17 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13.7 +/- 4.8
  Background counts = 1.4
  Rate = 0.002 +/- 0.0008

[Thu Sep 22 22:12:25 2011] Off-axis axis estimate = 8.17'
[Thu Sep 22 22:17:28 2011] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 22:17:28 2011] Initial guess for spatial extent in simple fitting = 10.51"
[Thu Sep 22 22:17:28 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.882
[Thu Sep 22 22:17:28 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.51"
[Thu Sep 22 22:28:03 2011] fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Sep 22 22:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9.csv
[Thu Sep 22 22:28:03 2011] fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Sep 22 22:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9.csv
[Thu Sep 22 22:28:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 22:28:03 2011] fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Sep 22 22:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Sep 22 22:28:03 2011] fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Sep 22 22:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Sep 22 22:28:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094382101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 22:40:55 2011] Spatial fit model total counts = 16.314500, observed total counts = 18.000000
[Thu Sep 22 22:40:55 2011] Offset between fit and detection position for source 8 = 0.338386 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.338386 pixels
  Position = (189.4, 271.5) = 1 23 53.11 34 17 44.0
  Extent = 8.6 (6.8-11.8)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0007
 Deleting source due to low signal-to-noise ratio