[Tue Aug 28 21:04:03 2012] Detection parameters:
  Position = (321.6, 305.1) = 0 35 52.40 59 50 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2205.6 +/- 55.5
  Background counts = 5.1
  Rate = 2 +/- 0.04

[Tue Aug 28 21:04:03 2012] Off-axis axis estimate = 1.75'
[Tue Aug 28 21:10:16 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 21:10:16 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Aug 28 21:10:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Tue Aug 28 21:10:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Aug 28 21:12:47 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 21:12:47 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 21:12:47 2012] Fit fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug 28 21:12:47 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 21:12:47 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 21:12:47 2012] Fit fullrun_mos2_xmm0094381301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 21:12:49 2012] Spatial fit model total counts = 1399.630000, observed total counts = 1363.000000
[Tue Aug 28 21:12:49 2012] Offset between fit and detection position for source 2 = 0.169017 pixels
[Tue Aug 28 21:12:49 2012] 1402.427000 total counts/ 378.667000 bgd. counts: snr = 52.610136
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.169017 pixels
  Position = (321.5, 305.2) = 0 35 52.50 59 50 2.6
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1023.8 +/- 37.4
  Background counts = 378.7
  Rate = 1 +/- 0.04
[Tue Aug 28 21:12:49 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 21:12:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 21:12:49 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 21:12:49 2012] Source does appear to be extended
[Tue Aug 28 21:12:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 21:18:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 21:18:48 2012] Initial guess for spatial extent in simple fitting = 5.04"
[Tue Aug 28 21:18:48 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.090
[Tue Aug 28 21:18:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.04"
[Tue Aug 28 21:19:44 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 21:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 21:19:44 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 21:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 21:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 21:19:44 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 21:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 28 21:19:44 2012] fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 21:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 28 21:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094381301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 21:19:46 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Aug 28 21:19:46 2012] Source 1 in spatial fitting is no longer close to this source
[Tue Aug 28 21:19:46 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 21:19:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 21:19:46 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 21:19:46 2012] Source does appear to be extended
[Tue Aug 28 21:19:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 21:22:28 2012] Counts = 1023.760000, rescaling region sizes by 2.000000
[Tue Aug 28 21:22:28 2012] XMMSAS src. selection expression = ellipse(27920.870400, 26500.149400, 605.146817, 605.146817, 0.000000, X, Y)
[Tue Aug 28 21:22:28 2012] Writing source region out to fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 28 21:22:28 2012] Extracting stamp from image fullrun_mos2_xmm0094381301_pi300-10000_cl_sm2.00.img.gz, (287, 270) - (356, 340)
[Tue Aug 28 21:22:28 2012] XMMSAS bgd. selection expression = annulus(27920.870400, 26500.149400, 2017.156058, 4034.312116, X, Y)
[Tue Aug 28 21:22:28 2012] Writing fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2.gif
[Tue Aug 28 21:22:29 2012] Mean detx,y = (33.17, 108.31) 
[Tue Aug 28 21:22:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 21:22:47 2012] grppha failed
[Tue Aug 28 21:22:47 2012] Setting source spectrum file to fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 21:22:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 28 21:22:54 2012] Updating aperture counts using extracted products
[Tue Aug 28 21:22:54 2012] Error reading totcts from fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 21:22:54 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 21:22:55 2012] Source 2 has no response, skipping
[Tue Aug 28 21:22:56 2012] xmm0094381301/analysis//spectral/fullrun_mos2_xmm0094381301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete