[Mon Jun  4 16:20:29 2012] Detection parameters:
  Position = (219.6, 438.1) = 3 49 41.15 -11 48 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.6 +/- 7.1
  Background counts = 6.7
  Rate = 0.005 +/- 0.001

[Mon Jun  4 16:20:29 2012] Off-axis axis estimate = 11.63'
[Mon Jun  4 16:30:49 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 16:30:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  4 16:30:49 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Mon Jun  4 16:30:49 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Mon Jun  4 16:30:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.24"
[Mon Jun  4 16:37:13 2012] fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  4 16:37:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 16:37:13 2012] fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  4 16:37:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 16:37:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:37:13 2012] fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  4 16:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 16:37:13 2012] fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  4 16:37:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 16:37:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094381101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:53:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.741017 pixels away
[Mon Jun  4 16:53:38 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 16:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 16:53:38 2012] Assessing source extent using major
[Mon Jun  4 16:53:38 2012] Source does appear to be extended
[Mon Jun  4 16:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 16:53:38 2012] Deleting source due to low Poisson probability 0.7