[Thu Jul  5 12:55:23 2012] Detection parameters:
  Position = (308.6, 319.1) = 6 50 46.62 25 2 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6784.1 +/- 97.3
  Background counts = 5.0
  Rate = 2 +/- 0.03

[Thu Jul  5 12:55:24 2012] Off-axis axis estimate = 1.67'
[Thu Jul  5 13:03:18 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:03:18 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jul  5 13:03:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Thu Jul  5 13:03:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Jul  5 13:11:00 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 13:11:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 13:11:00 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 13:11:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 13:11:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:11:00 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 13:11:00 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 13:11:00 2012] Fit fullrun_mos2_xmm0094380901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 13:11:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.557700 pixels away
[Thu Jul  5 13:11:02 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:11:02 2012] Assessing source extent using major
[Thu Jul  5 13:11:02 2012] Source does appear to be extended
[Thu Jul  5 13:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:14:29 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:14:29 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jul  5 13:14:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Thu Jul  5 13:14:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Thu Jul  5 13:20:11 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 13:20:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 13:20:11 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 13:20:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 13:20:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:20:11 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 13:20:11 2012] fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 13:20:11 2012] Fit fullrun_mos2_xmm0094380901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 13:20:13 2012] Spatial fit model total counts = 5424.330000, observed total counts = 5380.000000
[Thu Jul  5 13:20:13 2012] Offset between fit and detection position for source 1 = 0.188917 pixels
[Thu Jul  5 13:20:13 2012] 5445.470000 total counts/ 1236.720000 bgd. counts: snr = 119.678858
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188917 pixels
  Position = (308.5, 319.1) = 6 50 46.68 25 2 59.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 4208.8 +/- 73.8
  Background counts = 1236.7
  Rate = 1 +/- 0.03
[Thu Jul  5 13:20:13 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:20:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:20:13 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 13:20:13 2012] Source does appear to be extended
[Thu Jul  5 13:20:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:28:42 2012] Counts = 4208.750000, rescaling region sizes by 2.000000
[Thu Jul  5 13:28:42 2012] XMMSAS src. selection expression = ellipse(26786.849400, 27714.539000, 639.231618, 639.231618, 0.000000, X, Y)
[Thu Jul  5 13:28:42 2012] Writing source region out to fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul  5 13:28:42 2012] Extracting stamp from image fullrun_mos2_xmm0094380901_pi300-10000_cl_sm2.00.img.gz, (272, 282) - (345, 356)
[Thu Jul  5 13:28:42 2012] XMMSAS bgd. selection expression = annulus(26786.849400, 27714.539000, 2130.772061, 4261.544123, X, Y)
[Thu Jul  5 13:28:42 2012] Writing fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1.gif
[Thu Jul  5 13:28:43 2012] Mean detx,y = (163.31, 84.19) 
[Thu Jul  5 13:28:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:29:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:29:08 2012] Setting source spectrum file to fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 13:29:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul  5 13:32:53 2012] Updating aperture counts using extracted products
[Thu Jul  5 13:32:53 2012] Error reading totcts from fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 13:32:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 13:32:53 2012] Using photon index=1.80, rate=1.49, arf fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 13:32:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 13:32:53 2012] Updating source flux to 1.6e-11
[Thu Jul  5 13:33:10 2012] Reading fit data from xmm0094380901/analysis//spectral/fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul  5 13:33:10 2012] Spectral fit parameter nH value = 1.75532e+21
[Thu Jul  5 13:33:10 2012] Spectral fit parameter PhoIndex value = 2.90154
[Thu Jul  5 13:33:10 2012] Failed to get F(0.3-8.0) from xmm0094380901/analysis//spectral/fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 13:33:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 13:33:10 2012] Using Nh = 1.8e+21, photon index=2.90, rate=1.49, arf fullrun_mos2_xmm0094380901_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 13:33:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 13:33:10 2012] Updating source flux to 1.3e-11