[Thu Jun 13 08:01:16 2013] Detection parameters:
  Position = (250.1, 220.0) = 15 56 0.72 11 4 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 7.6
  Background counts = 2.9
  Rate = 0.01 +/- 0.002

[Thu Jun 13 08:01:16 2013] Off-axis axis estimate = 6.68'
[Thu Jun 13 08:16:55 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 08:16:55 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Thu Jun 13 08:16:55 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.194
[Thu Jun 13 08:16:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.77"
[Thu Jun 13 08:27:31 2013] fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 08:27:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 08:27:31 2013] fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 08:27:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 08:27:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 08:27:31 2013] fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 08:27:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 08:27:31 2013] fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 08:27:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 08:27:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 08:27:34 2013] Spatial fit model total counts = 32.189500, observed total counts = 55.000000
[Thu Jun 13 08:27:34 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 08:27:34 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 08:27:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 08:27:34 2013] Assessing source extent using major
[Thu Jun 13 08:27:34 2013] Source does appear to be extended
[Thu Jun 13 08:27:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 08:27:34 2013] Deleting source due to low Poisson probability 0.6