[Thu Jun 13 08:01:00 2013] Detection parameters:
  Position = (230.7, 388.2) = 15 56 6.45 11 16 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 7.9
  Background counts = 3.1
  Rate = 0.01 +/- 0.003

[Thu Jun 13 08:01:00 2013] Off-axis axis estimate = 8.15'
[Thu Jun 13 08:10:54 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 08:10:54 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Thu Jun 13 08:10:54 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.971
[Thu Jun 13 08:10:54 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.50"
[Thu Jun 13 08:16:55 2013] fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 08:16:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 08:16:55 2013] fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 08:16:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 08:16:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 08:16:55 2013] fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 08:16:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 08:16:55 2013] fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 08:16:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 08:16:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094380801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 08:27:33 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.759564 pixels away
[Thu Jun 13 08:27:33 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 08:27:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 08:27:33 2013] Assessing source extent using major
[Thu Jun 13 08:27:33 2013] Source does appear to be extended
[Thu Jun 13 08:27:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 08:27:33 2013] Deleting source due to low Poisson probability 0.8