[Fri Aug 17 20:26:44 2012] Detection parameters:
  Position = (309.2, 134.9) = 11 15 13.41 -22 7 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.2 +/- 12.5
  Background counts = 25.6
  Rate = 0.003 +/- 0.0004

[Fri Aug 17 20:26:44 2012] Off-axis axis estimate = 11.88'
[Fri Aug 17 20:28:59 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 20:28:59 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Fri Aug 17 20:28:59 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.939
[Fri Aug 17 20:28:59 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 12.37"
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52.ximg exists
[Fri Aug 17 21:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52.csv
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Aug 17 21:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52.csv
[Fri Aug 17 21:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Aug 17 21:26:18 2012] Fit fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Aug 17 22:32:16 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 15.214839 pixels away
[Fri Aug 17 22:32:16 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:32:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:32:16 2012] Assessing source extent using major
[Fri Aug 17 22:32:16 2012] Source does appear to be extended
[Fri Aug 17 22:32:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:32:37 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 22:32:37 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Fri Aug 17 22:32:37 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.939
[Fri Aug 17 22:32:37 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 12.37"
[Fri Aug 17 23:29:32 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50.ximg exists
[Fri Aug 17 23:29:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50.csv
[Fri Aug 17 23:29:32 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Aug 17 23:29:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50.csv
[Fri Aug 17 23:29:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 23:29:33 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Aug 17 23:29:33 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Aug 17 23:29:33 2012] Fit fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Sat Aug 18 00:32:40 2012] Spatial fit model total counts = 436.336000, observed total counts = 406.000000
[Sat Aug 18 00:32:40 2012] Offset between fit and detection position for source 52 = 0.095388 pixels
[Sat Aug 18 00:32:40 2012] 431.279500 total counts/ 385.595000 bgd. counts: snr = 2.326501
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.095388 pixels
  Position = (309.2, 135.0) = 11 15 13.39 -22 6 59.8
  Extent = 3.1 (3.1-4.2)", rotation angle = 0
  Source counts = 45.7 +/- 20.8
  Background counts = 385.6
  Rate = 0.002 +/- 0.0007
[Sat Aug 18 00:32:40 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:32:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:32:40 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:32:40 2012] Source does appear to be extended
[Sat Aug 18 00:32:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 00:33:01 2012] XMMSAS src. selection expression = ellipse(26855.810000, 11697.858200, 185.652005, 185.652005, 0.000000, X, Y)
[Sat Aug 18 00:33:01 2012] Writing source region out to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52_src.reg
[Sat Aug 18 00:33:01 2012] Extracting stamp from image fullrun_pn_xmm0094380101_pi300-10000_cl_sm2.00.img.gz, (299, 124) - (320, 146)
[Sat Aug 18 00:33:01 2012] XMMSAS bgd. selection expression = annulus(26855.810000, 11697.858200, 309.420009, 618.840018, X, Y)
[Sat Aug 18 00:33:01 2012] Writing fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52.gif
[Sat Aug 18 01:01:10 2012] Mean detx,y = (4030.89, -12149.63) 
[Sat Aug 18 01:01:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 01:01:28 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 01:01:28 2012] Setting source spectrum file to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Aug 18 01:01:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Aug 18 01:31:51 2012] Not generating rmf since there are only 45 counts
[Sat Aug 18 01:31:51 2012] rmf not generated due to insufficient counts
[Sat Aug 18 02:07:30 2012] Updating aperture counts using extracted products
[Sat Aug 18 02:07:30 2012] Error reading totcts from fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Aug 18 02:07:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 02:07:31 2012] Using photon index=1.80, rate=0.00154, arf fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src52.arf
[Sat Aug 18 02:07:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 02:07:31 2012] Updating source flux to 1.4e-14
[Sat Aug 18 02:07:59 2012] Source 52 has fewer than 100.000000 counts, skipping spectral fitting