[Fri Aug 17 20:26:43 2012] Detection parameters:
  Position = (282.0, 409.4) = 11 15 21.92 -21 47 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.9 +/- 12.8
  Background counts = 24.4
  Rate = 0.003 +/- 0.0004

[Fri Aug 17 20:26:44 2012] Off-axis axis estimate = 8.13'
[Fri Aug 17 20:28:59 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 20:28:59 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Fri Aug 17 20:28:59 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Fri Aug 17 20:28:59 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.49"
[Fri Aug 17 21:26:17 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 17 21:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 21:26:17 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 17 21:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 21:26:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 17 21:26:18 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 17 21:26:18 2012] Fit fullrun_pn_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Aug 17 22:32:16 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.255828 pixels away
[Fri Aug 17 22:32:16 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:32:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:32:16 2012] Assessing source extent using major
[Fri Aug 17 22:32:16 2012] Source does appear to be extended
[Fri Aug 17 22:32:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:32:37 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 22:32:37 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Fri Aug 17 22:32:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Fri Aug 17 22:32:37 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.49"
[Fri Aug 17 23:29:31 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 17 23:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 23:29:31 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 17 23:29:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 23:29:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 23:29:32 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 17 23:29:32 2012] fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 17 23:29:32 2012] Fit fullrun_pn_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Aug 18 00:32:40 2012] Spatial fit model total counts = 307.420000, observed total counts = 287.000000
[Sat Aug 18 00:32:40 2012] Offset between fit and detection position for source 11 = 0.834761 pixels
[Sat Aug 18 00:32:40 2012] 311.678100 total counts/ 267.262000 bgd. counts: snr = 2.716888
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.834761 pixels
  Position = (281.1, 409.6) = 11 15 22.17 -21 47 5.5
  Extent = 3.0 (2.6-4.3)", rotation angle = 0
  Source counts = 44.4 +/- 17.7
  Background counts = 267.3
  Rate = 0.001 +/- 0.0006
[Sat Aug 18 00:32:40 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:32:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:32:40 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:32:40 2012] Source does appear to be extended
[Sat Aug 18 00:32:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 00:33:00 2012] XMMSAS src. selection expression = ellipse(24410.089200, 35582.915800, 181.232405, 181.232405, 0.000000, X, Y)
[Sat Aug 18 00:33:00 2012] Writing source region out to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11_src.reg
[Sat Aug 18 00:33:00 2012] Extracting stamp from image fullrun_pn_xmm0094380101_pi300-10000_cl_sm2.00.img.gz, (271, 399) - (292, 420)
[Sat Aug 18 00:33:00 2012] XMMSAS bgd. selection expression = annulus(24410.089200, 35582.915800, 302.054009, 604.108017, X, Y)
[Sat Aug 18 00:33:00 2012] Writing fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11.gif
[Sat Aug 18 00:39:42 2012] Mean detx,y = (-3327.48, 10645.74) 
[Sat Aug 18 00:39:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 00:39:55 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 00:39:56 2012] Setting source spectrum file to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Aug 18 00:39:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Aug 18 01:16:23 2012] Not generating rmf since there are only 44 counts
[Sat Aug 18 01:16:23 2012] rmf not generated due to insufficient counts
[Sat Aug 18 02:07:29 2012] Updating aperture counts using extracted products
[Sat Aug 18 02:07:29 2012] Error reading totcts from fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Aug 18 02:07:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 02:07:30 2012] Using photon index=1.80, rate=0.0015, arf fullrun_pn_xmm0094380101_pi300-10000_pass1_cl_src11.arf
[Sat Aug 18 02:07:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 02:07:30 2012] Updating source flux to 1.5e-14
[Sat Aug 18 02:07:59 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting