[Fri Aug 17 20:27:29 2012] Detection parameters:
  Position = (313.6, 297.1) = 11 15 12.03 -21 55 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.5 +/- 10.9
  Background counts = 9.6
  Rate = 0.002 +/- 0.0004

[Fri Aug 17 20:27:29 2012] Off-axis axis estimate = 1.10'
[Fri Aug 17 21:57:03 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:57:03 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Fri Aug 17 21:57:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Fri Aug 17 21:57:03 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 6.98"
[Fri Aug 17 22:32:06 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Aug 17 22:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 17 22:32:06 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Aug 17 22:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 17 22:32:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:32:06 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Aug 17 22:32:06 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Aug 17 22:32:06 2012] Fit fullrun_mos2_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Aug 17 22:32:25 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.131627 pixels away
[Fri Aug 17 22:32:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:32:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:32:25 2012] Assessing source extent using major
[Fri Aug 17 22:32:25 2012] Source does appear to be extended
[Fri Aug 17 22:32:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 00:00:31 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 00:00:31 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Sat Aug 18 00:00:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Sat Aug 18 00:00:31 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.98"
[Sat Aug 18 00:32:30 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Aug 18 00:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15.csv
[Sat Aug 18 00:32:30 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Aug 18 00:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15.csv
[Sat Aug 18 00:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 00:32:30 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Aug 18 00:32:30 2012] fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Aug 18 00:32:30 2012] Fit fullrun_mos2_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Aug 18 00:32:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 36.425348 pixels away
[Sat Aug 18 00:32:49 2012] Source 18 is offset by -5.813931 and -7.301816 pixels which is larger than
2 X fitted extent = 0.802354 x 0.802354, not incorporating fit results
[Sat Aug 18 00:32:49 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 33.211792 pixels away
[Sat Aug 18 00:32:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:32:49 2012] Assessing source extent using major
[Sat Aug 18 00:32:49 2012] Source does appear to be extended
[Sat Aug 18 00:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:53:02 2012] XMMSAS src. selection expression = ellipse(27235.127991, 25800.682037, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 18 01:53:02 2012] Writing source region out to fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18_src.reg
[Sat Aug 18 01:53:02 2012] Extracting stamp from image fullrun_mos2_xmm0094380101_pi300-10000_cl_sm2.00.img.gz, (276, 260) - (351, 335)
[Sat Aug 18 01:53:02 2012] XMMSAS bgd. selection expression = annulus(27235.127991, 25800.682037, 1087.500000, 2175.000000, X, Y) && !ellipse(25563.417000, 23783.374000, 423.253612, 423.253612, 0.000000, X, Y)
[Sat Aug 18 01:53:02 2012] Writing fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18.gif
[Sat Aug 18 01:56:33 2012] Mean detx,y = (2165.52, -815.47) 
[Sat Aug 18 01:56:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 01:56:43 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 01:56:43 2012] Setting source spectrum file to fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug 18 01:56:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Aug 18 02:05:03 2012] Not generating rmf since there are only 67 counts
[Sat Aug 18 02:05:03 2012] rmf not generated due to insufficient counts
[Sat Aug 18 02:07:31 2012] Updating aperture counts using extracted products
[Sat Aug 18 02:07:31 2012] Error reading totcts from fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug 18 02:07:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 02:07:32 2012] Using photon index=1.80, rate=0.00236, arf fullrun_mos2_xmm0094380101_pi300-10000_pass1_cl_src18.arf
[Sat Aug 18 02:07:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 02:07:32 2012] Updating source flux to 2.4e-14
[Sat Aug 18 02:07:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting