[Fri Aug 17 20:27:07 2012] Detection parameters:
  Position = (339.6, 229.2) = 11 15 3.90 -22 0 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 10.1
  Background counts = 9.8
  Rate = 0.002 +/- 0.0004

[Fri Aug 17 20:27:07 2012] Off-axis axis estimate = 5.84'
[Fri Aug 17 21:26:18 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 21:26:18 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Fri Aug 17 21:26:18 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.891
[Fri Aug 17 21:26:18 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.35"
[Fri Aug 17 21:57:03 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 17 21:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 21:57:03 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 17 21:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 21:57:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 21:57:03 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 17 21:57:03 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 17 21:57:03 2012] Fit fullrun_mos1_xmm0094380101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 17 22:32:20 2012] Spatial fit model total counts = 172.000000, observed total counts = 172.000000
[Fri Aug 17 22:32:20 2012] Offset between fit and detection position for source 22 = 0.216703 pixels
[Fri Aug 17 22:32:20 2012] 171.925600 total counts/ 143.079000 bgd. counts: snr = 2.411608
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.216703 pixels
  Position = (339.5, 229.4) = 11 15 3.92 -22 0 9.1
  Extent = 3.9 (2.6-5.6)", rotation angle = 0
  Source counts = 28.8 +/- 13.1
  Background counts = 143.1
  Rate = 0.0009 +/- 0.0004
[Fri Aug 17 22:32:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 22:32:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 22:32:20 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 22:32:20 2012] Source does appear to be extended
[Fri Aug 17 22:32:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 23:29:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:29:33 2012] Initial guess for spatial extent in simple fitting = 3.89"
[Fri Aug 17 23:29:33 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.159
[Fri Aug 17 23:29:33 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 3.89"
[Sat Aug 18 00:00:31 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Aug 18 00:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 18 00:00:31 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Aug 18 00:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 18 00:00:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 00:00:31 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Aug 18 00:00:31 2012] fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Aug 18 00:00:31 2012] Fit fullrun_mos1_xmm0094380101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Aug 18 00:32:44 2012] Spatial fit model total counts = 176.000000, observed total counts = 176.000000
[Sat Aug 18 00:32:44 2012] Offset between fit and detection position for source 22 = 0.012334 pixels
[Sat Aug 18 00:32:44 2012] 177.394300 total counts/ 148.471000 bgd. counts: snr = 2.373707
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.012334 pixels
  Position = (339.5, 229.4) = 11 15 3.92 -22 0 9.2
  Extent = 3.9 (2.6-5.6)", rotation angle = 0
  Source counts = 28.9 +/- 13.3
  Background counts = 148.5
  Rate = 0.0009 +/- 0.0004
[Sat Aug 18 00:32:44 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:32:44 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:32:44 2012] Source does appear to be extended
[Sat Aug 18 00:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:32:11 2012] XMMSAS src. selection expression = ellipse(29489.060000, 19909.762600, 233.904162, 233.904162, 0.000000, X, Y)
[Sat Aug 18 01:32:11 2012] Writing source region out to fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22_src.reg
[Sat Aug 18 01:32:11 2012] Extracting stamp from image fullrun_mos1_xmm0094380101_pi300-10000_cl_sm2.00.img.gz, (326, 216) - (353, 243)
[Sat Aug 18 01:32:11 2012] XMMSAS bgd. selection expression = annulus(29489.060000, 19909.762600, 389.840270, 779.680541, X, Y)
[Sat Aug 18 01:32:11 2012] Writing fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22.gif
[Sat Aug 18 01:34:30 2012] Mean detx,y = (5604.00, -2155.80) 
[Sat Aug 18 01:34:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 01:34:37 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 01:34:37 2012] Setting source spectrum file to fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Aug 18 01:34:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Aug 18 01:51:47 2012] Not generating rmf since there are only 28 counts
[Sat Aug 18 01:51:47 2012] rmf not generated due to insufficient counts
[Sat Aug 18 02:07:31 2012] Updating aperture counts using extracted products
[Sat Aug 18 02:07:31 2012] Error reading totcts from fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Aug 18 02:07:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 02:07:31 2012] Using photon index=1.80, rate=0.000916, arf fullrun_mos1_xmm0094380101_pi300-10000_pass1_cl_src22.arf
[Sat Aug 18 02:07:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 02:07:31 2012] Updating source flux to 1.9e-14
[Sat Aug 18 02:07:34 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting