[Wed Apr 11 06:33:40 2012] Detection parameters: Position = (302.5, 322.0) = 12 50 53.16 41 7 14.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 9231.2 +/- 115.0 Background counts = 74.5 Rate = 0.7 +/- 0.009 [Wed Apr 11 06:33:40 2012] Off-axis axis estimate = 1.74' [Wed Apr 11 06:33:48 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting [Wed Apr 11 06:33:48 2012] Initial guess for spatial extent in simple fitting = 7.30" [Wed Apr 11 06:33:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055 [Wed Apr 11 06:33:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30" [Wed Apr 11 06:33:49 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1.ximg exists [Wed Apr 11 06:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1.csv [Wed Apr 11 06:33:49 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Apr 11 06:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1.csv [Wed Apr 11 06:33:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Apr 11 06:33:49 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Apr 11 06:33:49 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Apr 11 06:33:49 2012] Fit fullrun_pn_xmm0094360701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed Apr 11 06:33:52 2012] Source 1 is offset by -6.205099 and 5.734578 pixels which is larger than 2 X fitted extent = 0.838653 x 0.838653, not incorporating fit results [Wed Apr 11 06:33:52 2012] Spatial fit model total counts = 462.025000, observed total counts = 463.000000 [Wed Apr 11 06:33:52 2012] Offset between fit and detection position for source 1 = 6.999192 pixels [Wed Apr 11 06:33:52 2012] Warning, changing simple spatial fit ID from 1 to 4 [Wed Apr 11 06:33:52 2012] 469.069000 total counts/ 344.200000 bgd. counts: snr = 6.730529 Spatial fit parameters: Offset between fit and detection position for source 1 = 6.999192 pixels Position = (296.0, 324.5) = 12 50 55.68 41 7 24.9 Extent = 15.3 (11.9-30.6)" x 6.7 (5.3-8.9)", rotation angle = 343 (329-358) degrees Source counts = 124.9 +/- 21.7 Background counts = 344.2 Rate = 0.02 +/- 0.004 [Wed Apr 11 06:33:52 2012] Vigneting correction estimate = 1.000000 [Wed Apr 11 06:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Apr 11 06:33:52 2012] Assessing source extent using major axis lower bound [Wed Apr 11 06:33:52 2012] Source does appear to be extended [Wed Apr 11 06:33:52 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.34 [Wed Apr 11 06:33:52 2012] Source is confused with source 4 [Wed Apr 11 06:33:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Apr 11 06:33:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Apr 11 06:33:57 2012] Initial guess for spatial extent in simple fitting = 11.01" [Wed Apr 11 06:33:57 2012] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.870 [Wed Apr 11 06:33:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.01" [Wed Apr 11 06:33:57 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1.ximg exists [Wed Apr 11 06:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1.csv [Wed Apr 11 06:33:57 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Apr 11 06:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1.csv [Wed Apr 11 06:33:57 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Apr 11 06:33:58 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Apr 11 06:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Apr 11 06:33:58 2012] fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Apr 11 06:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Apr 11 06:33:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0094360701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Apr 11 06:34:00 2012] Warning, spatial fit 1 centroid is now closest to src. 4 [Wed Apr 11 06:34:00 2012] Spatial fit model total counts = 463.400000, observed total counts = 463.000000 [Wed Apr 11 06:34:00 2012] Offset between fit and detection position for source 1 = 0.055445 pixels [Wed Apr 11 06:34:00 2012] Warning, changing simple spatial fit ID from 1 to 4 [Wed Apr 11 06:34:00 2012] 467.910000 total counts/ 339.029000 bgd. counts: snr = 6.999556 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.055445 pixels Position = (296.0, 324.5) = 12 50 55.66 41 7 25.0 Extent = 15.3 (12.2-30.6)" x 6.5 (5.6-8.1)", rotation angle = 166 (149-174) degrees Source counts = 128.9 +/- 21.6 Background counts = 339.0 Rate = 0.02 +/- 0.004 [Wed Apr 11 06:34:00 2012] Vigneting correction estimate = 1.000000 [Wed Apr 11 06:34:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Apr 11 06:34:00 2012] Assessing source extent using major axis lower bound [Wed Apr 11 06:34:00 2012] Source does appear to be extended [Wed Apr 11 06:34:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50 [Wed Apr 11 06:34:00 2012] Source is asymmetric [Wed Apr 11 06:34:05 2012] XMMSAS src. selection expression = ellipse(25705.792000, 28186.874000, 917.064026, 390.688811, 165.719000, X, Y) [Wed Apr 11 06:34:05 2012] Not overwriting source region fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src.reg [Wed Apr 11 06:34:05 2012] Extracting stamp from image fullrun_pn_xmm0094360701_pi300-10000_cl_sm2.00.img.gz, (243, 272) - (349, 377) [Wed Apr 11 06:34:05 2012] XMMSAS bgd. selection expression = annulus(25705.792000, 28186.874000, 1528.440044, 3056.880088, X, Y) && !ellipse(25144.515442, 28724.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27467.240200, 25511.329080, 375.871211, 375.871211, 0.000000, X, Y) [Wed Apr 11 06:34:05 2012] Writing fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1.gif [Wed Apr 11 06:34:05 2012] ../../xmm0094360701/products/events/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0094360701/products/events/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create [Wed Apr 11 06:34:05 2012] Mean detx,y = (14.31, -352.83) [Wed Apr 11 06:34:05 2012] ../../xmm0094360701/products/images/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0094360701/products/images/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create [Wed Apr 11 06:34:05 2012] ../../xmm0094360701/products/spectra/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0094360701/products/spectra/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create [Wed Apr 11 06:34:05 2012] Setting source spectrum file to fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Apr 11 06:34:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Apr 11 06:34:05 2012] ../../xmm0094360701/products/lightcurves/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0094360701/products/lightcurves/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create [Wed Apr 11 06:34:06 2012] fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create [Wed Apr 11 06:34:06 2012] fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1.arf exists, delete to re-create [Wed Apr 11 06:34:36 2012] Updating aperture counts using extracted products [Wed Apr 11 06:34:36 2012] Error reading totcts from fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Apr 11 06:34:37 2012] Calculating source flux in energy range 0.30-8.00 [Wed Apr 11 06:34:37 2012] Using photon index=1.80, rate=0.0214, arf fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1.arf [Wed Apr 11 06:34:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Apr 11 06:34:37 2012] Updating source flux to 7.2e-14 [Wed Apr 11 06:34:41 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Wed Apr 11 06:34:41 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Wed Apr 11 06:34:42 2012] Reading fit data from xmm0094360701/analysis//spectral/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_pl.csv [Wed Apr 11 06:34:42 2012] Spectral fit parameter nH value = 3.8685e+20 [Wed Apr 11 06:34:42 2012] Spectral fit parameter PhoIndex value = 1.93543 [Wed Apr 11 06:34:42 2012] Failed to get F(0.3-8.0) from xmm0094360701/analysis//spectral/fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Apr 11 06:34:42 2012] Calculating source flux in energy range 0.30-8.00 [Wed Apr 11 06:34:42 2012] Using Nh = 3.9e+20, photon index=1.94, rate=0.0214, arf fullrun_pn_xmm0094360701_pi300-10000_pass1_cl_src1.arf [Wed Apr 11 06:34:42 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Apr 11 06:34:42 2012] Updating source flux to 7.2e-14