[Wed Apr 11 07:59:39 2012] Detection parameters:
  Position = (284.6, 318.1) = 12 50 56.19 41 6 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.0 +/- 17.3
  Background counts = 8.6
  Rate = 0.02 +/- 0.002

[Wed Apr 11 07:59:40 2012] Off-axis axis estimate = 1.74'
[Wed Apr 11 07:59:52 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:59:52 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Apr 11 07:59:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Wed Apr 11 07:59:52 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30"
[Wed Apr 11 07:59:52 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2.ximg exists
[Wed Apr 11 07:59:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2.csv
[Wed Apr 11 07:59:52 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Apr 11 07:59:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2.csv
[Wed Apr 11 07:59:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:59:53 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Apr 11 07:59:53 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Apr 11 07:59:53 2012] Fit fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Apr 11 08:00:00 2012] Source 2 is offset by -6.063579 and -3.888598 pixels which is larger than
2 X fitted extent = 3.009104 x 3.009104, not incorporating fit results
[Wed Apr 11 08:00:00 2012] Source 2 is offset by -1.501740 and -5.800506 pixels which is larger than
2 X fitted extent = 3.724244 x 3.724244, not incorporating fit results
[Wed Apr 11 08:00:00 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 08:00:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 08:00:00 2012] Assessing source extent using major
[Wed Apr 11 08:00:00 2012] Source does appear to be extended
[Wed Apr 11 08:00:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 08:00:07 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 08:00:07 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Apr 11 08:00:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Wed Apr 11 08:00:07 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.30"
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2.csv
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2.csv
[Wed Apr 11 08:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Apr 11 08:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 08:00:13 2012] Warning, spatial fit 2 centroid is now closest to src. 5
[Wed Apr 11 08:00:13 2012] Source 2 is offset by -1.501740 and -5.800506 pixels which is larger than
2 X fitted extent = 3.807729 x 3.807729, not incorporating fit results
[Wed Apr 11 08:00:13 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 08:00:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 08:00:13 2012] Assessing source extent using major
[Wed Apr 11 08:00:13 2012] Source does appear to be extended
[Wed Apr 11 08:00:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 08:00:21 2012] XMMSAS src. selection expression = ellipse(24715.786621, 27621.917969, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 08:00:21 2012] Not overwriting source region fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src.reg
[Wed Apr 11 08:00:21 2012] Extracting stamp from image fullrun_mos2_xmm0094360601_pi300-10000_cl_sm2.00.img.gz, (247, 281) - (322, 356)
[Wed Apr 11 08:00:21 2012] XMMSAS bgd. selection expression = annulus(24715.786621, 27621.917969, 1087.500000, 2175.000000, X, Y) && !ellipse(25407.367000, 27999.911800, 554.655216, 554.655216, 0.000000, X, Y) && !ellipse(26332.372894, 28505.548889, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 08:00:21 2012] Writing fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2.gif
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/events/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0094360601/products/events/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Apr 11 08:00:21 2012] Mean detx,y = (583.97, 327.68) 
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/images/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src.img and ../../xmm0094360601/products/images/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/spectra/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0094360601/products/spectra/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Apr 11 08:00:21 2012] Setting source spectrum file to fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 08:00:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/lightcurves/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0094360601/products/lightcurves/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Apr 11 08:00:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 08:00:21 2012] rmf not generated due to insufficient counts
[Wed Apr 11 08:00:21 2012] fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Wed Apr 11 08:00:58 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:00:58 2012] Error reading totcts from fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 08:00:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:00:58 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src2.arf
[Wed Apr 11 08:00:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:00:58 2012] Updating source flux to 1.5e-13
[Wed Apr 11 08:01:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting