[Wed Apr 11 07:59:39 2012] Detection parameters:
  Position = (292.7, 322.2) = 12 50 53.10 41 7 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2817.1 +/- 63.0
  Background counts = 8.9
  Rate = 0.3 +/- 0.006

[Wed Apr 11 07:59:40 2012] Off-axis axis estimate = 1.77'
[Wed Apr 11 07:59:52 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:59:52 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Apr 11 07:59:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Wed Apr 11 07:59:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Wed Apr 11 07:59:52 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 07:59:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 07:59:52 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 07:59:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 07:59:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:59:53 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 07:59:53 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 07:59:53 2012] Fit fullrun_mos2_xmm0094360601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 08:00:00 2012] Spatial fit model total counts = 3251.140000, observed total counts = 3244.000000
[Wed Apr 11 08:00:00 2012] Offset between fit and detection position for source 1 = 0.236680 pixels
[Wed Apr 11 08:00:00 2012] 3234.930000 total counts/ 1168.280000 bgd. counts: snr = 60.463525
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.236680 pixels
  Position = (292.6, 322.4) = 12 50 53.13 41 7 13.7
  Extent = 6.9 (6.7-7.2)", rotation angle = 0
  Source counts = 2066.7 +/- 56.9
  Background counts = 1168.3
  Rate = 0.2 +/- 0.006
[Wed Apr 11 08:00:00 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 08:00:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 08:00:00 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 08:00:00 2012] Source does appear to be extended
[Wed Apr 11 08:00:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 08:00:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 08:00:07 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Wed Apr 11 08:00:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Wed Apr 11 08:00:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.93"
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 08:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 08:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 08:00:07 2012] fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 08:00:07 2012] Fit fullrun_mos2_xmm0094360601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 08:00:13 2012] Spatial fit model total counts = 3245.040000, observed total counts = 3244.000000
[Wed Apr 11 08:00:13 2012] Offset between fit and detection position for source 1 = 0.000527 pixels
[Wed Apr 11 08:00:13 2012] 3228.920000 total counts/ 1167.100000 bgd. counts: snr = 60.352701
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000527 pixels
  Position = (292.6, 322.4) = 12 50 53.13 41 7 13.7
  Extent = 6.9 (6.7-7.2)", rotation angle = 0
  Source counts = 2061.8 +/- 56.8
  Background counts = 1167.1
  Rate = 0.2 +/- 0.006
[Wed Apr 11 08:00:13 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 08:00:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 08:00:13 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 08:00:13 2012] Source does appear to be extended
[Wed Apr 11 08:00:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 08:00:21 2012] Counts = 2061.820000, rescaling region sizes by 2.000000
[Wed Apr 11 08:00:21 2012] XMMSAS src. selection expression = ellipse(25407.367000, 27999.911800, 831.982824, 831.982824, 0.000000, X, Y)
[Wed Apr 11 08:00:21 2012] Not overwriting source region fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src.reg
[Wed Apr 11 08:00:21 2012] Extracting stamp from image fullrun_mos2_xmm0094360601_pi300-10000_cl_sm2.00.img.gz, (245, 275) - (340, 370)
[Wed Apr 11 08:00:21 2012] XMMSAS bgd. selection expression = annulus(25407.367000, 27999.911800, 2773.276080, 5546.552160, X, Y) && !ellipse(24715.786621, 27621.917969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.372894, 28505.548889, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 08:00:21 2012] Writing fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1.gif
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/events/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0094360601/products/events/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Apr 11 08:00:21 2012] Mean detx,y = (101.48, 173.61) 
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/images/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src.img and ../../xmm0094360601/products/images/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/spectra/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0094360601/products/spectra/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Apr 11 08:00:21 2012] Setting source spectrum file to fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 08:00:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Apr 11 08:00:21 2012] ../../xmm0094360601/products/lightcurves/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0094360601/products/lightcurves/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Apr 11 08:00:21 2012] fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Apr 11 08:00:21 2012] fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Apr 11 08:00:58 2012] Updating aperture counts using extracted products
[Wed Apr 11 08:00:58 2012] Error reading totcts from fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 08:00:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:00:58 2012] Using photon index=1.80, rate=0.205, arf fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 08:00:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:00:58 2012] Updating source flux to 1.9e-12
[Wed Apr 11 08:01:01 2012] Reading fit data from xmm0094360601/analysis//spectral/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Apr 11 08:01:01 2012] Spectral fit parameter nH value = 4.23281e+20
[Wed Apr 11 08:01:01 2012] Spectral fit parameter PhoIndex value = 2.02201
[Wed Apr 11 08:01:01 2012] Failed to get F(0.3-8.0) from xmm0094360601/analysis//spectral/fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 08:01:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 08:01:01 2012] Using Nh = 4.2e+20, photon index=2.02, rate=0.205, arf fullrun_mos2_xmm0094360601_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 08:01:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 08:01:01 2012] Updating source flux to 1.8e-12