[Tue Jul 17 15:31:08 2012] Detection parameters:
  Position = (271.8, 292.1) = 22 17 47.50 0 13 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.3 +/- 24.5
  Background counts = 140.0
  Rate = 0.004 +/- 0.0004

[Tue Jul 17 15:31:09 2012] Off-axis axis estimate = 1.99'
[Tue Jul 17 15:36:26 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:36:26 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Jul 17 15:36:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Tue Jul 17 15:36:26 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.42"
[Tue Jul 17 17:25:47 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_src48.ximg exists
[Tue Jul 17 17:25:47 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue Jul 17 17:25:47 2012] Fit fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_src48 appears to have run properly
[Tue Jul 17 17:25:48 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue Jul 17 17:25:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Tue Jul 17 17:25:48 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue Jul 17 17:25:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Tue Jul 17 17:25:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:37 2012] Source 50 is offset by -5.344369 and 7.046806 pixels which is larger than
2 X fitted extent = 0.887260 x 0.887260, not incorporating fit results
[Tue Jul 17 19:33:37 2012] Source 50 is offset by -9.165886 and -3.610367 pixels which is larger than
2 X fitted extent = 1.239949 x 1.239949, not incorporating fit results
[Tue Jul 17 19:33:37 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 19:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 19:33:37 2012] Assessing source extent using major
[Tue Jul 17 19:33:37 2012] Source does appear to be extended
[Tue Jul 17 19:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 19:34:12 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 19:34:12 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Jul 17 19:34:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Tue Jul 17 19:34:12 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 7.42"
[Tue Jul 17 21:28:04 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47.ximg exists
[Tue Jul 17 21:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47.csv
[Tue Jul 17 21:28:04 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47_1.ximg exists
[Tue Jul 17 21:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47.csv
[Tue Jul 17 21:28:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:28:05 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Tue Jul 17 21:28:05 2012] fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Tue Jul 17 21:28:05 2012] Fit fullrun_pn_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Tue Jul 17 23:09:15 2012] Spatial fit model total counts = 812.844000, observed total counts = 745.000000
[Tue Jul 17 23:09:15 2012] Offset between fit and detection position for source 50 = 0.539759 pixels
[Tue Jul 17 23:09:15 2012] 813.046000 total counts/ 652.869000 bgd. counts: snr = 6.268839
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.539759 pixels
  Position = (272.3, 292.2) = 22 17 47.34 0 13 31.5
  Extent = 7.6 (5.7-9.6)", rotation angle = 0
  Source counts = 160.2 +/- 28.5
  Background counts = 652.9
  Rate = 0.002 +/- 0.0004
[Tue Jul 17 23:09:15 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:09:15 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 23:09:15 2012] Source does appear to be extended
[Tue Jul 17 23:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:09:43 2012] XMMSAS src. selection expression = ellipse(23640.911800, 25371.477200, 455.386813, 455.386813, 0.000000, X, Y)
[Tue Jul 17 23:09:43 2012] Writing source region out to fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50_src.reg
[Tue Jul 17 23:09:43 2012] Extracting stamp from image fullrun_pn_xmm0094310201_pi300-10000_cl_sm2.00.img.gz, (246, 266) - (298, 318)
[Tue Jul 17 23:09:43 2012] XMMSAS bgd. selection expression = annulus(23640.911800, 25371.477200, 758.978022, 1517.956044, X, Y) && !ellipse(23447.088504, 24030.488798, 467.279645, 396.011479, 253.079978, X, Y) && !ellipse(22459.805573, 23253.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21302.102615, 27376.449890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.285080, 26875.508400, 428.482412, 333.653610, 49.928184, X, Y) && !ellipse(25099.876040, 23470.352200, 404.896812, 404.896812, 0.000000, X, Y)
[Tue Jul 17 23:09:43 2012] Writing fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50.gif
[Tue Jul 17 23:54:41 2012] Mean detx,y = (-3010.88, 2730.14) 
[Tue Jul 17 23:54:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 23:55:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 23:55:06 2012] Setting source spectrum file to fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jul 17 23:55:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Jul 18 02:19:59 2012] Updating aperture counts using extracted products
[Wed Jul 18 02:19:59 2012] Error reading totcts from fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Jul 18 02:20:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 02:20:00 2012] Using photon index=1.80, rate=0.00238, arf fullrun_pn_xmm0094310201_pi300-10000_pass1_cl_src50.arf
[Wed Jul 18 02:20:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 02:20:00 2012] Updating source flux to 8.1e-15
[Wed Jul 18 02:21:24 2012] Flag b found in src. 50 procflags, skipping spectral fitting