[Tue Jul 17 15:32:09 2012] Detection parameters:
  Position = (404.8, 482.6) = 22 17 8.91 0 27 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.4 +/- 18.2
  Background counts = 22.2
  Rate = 0.003 +/- 0.0002

[Tue Jul 17 15:32:11 2012] Off-axis axis estimate = 15.42'
[Tue Jul 17 18:22:12 2012] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:22:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 18:22:12 2012] Initial guess for spatial extent in simple fitting = 14.14"
[Tue Jul 17 18:22:12 2012] source mask rpix=3.2, npix_max = 56, mask sum = 41, frac = 0.729
[Tue Jul 17 18:22:12 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 14.14"
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10.csv
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10.csv
[Tue Jul 17 19:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jul 17 19:33:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jul 17 19:33:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jul 17 19:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:51 2012] Spatial fit model total counts = -647.953000, observed total counts = 394.000000
[Tue Jul 17 19:33:51 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 19:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 19:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 19:33:51 2012] Assessing source extent using major
[Tue Jul 17 19:33:51 2012] Source does appear to be extended
[Tue Jul 17 19:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:15:04 2012] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:15:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 22:15:04 2012] Initial guess for spatial extent in simple fitting = 14.14"
[Tue Jul 17 22:15:04 2012] source mask rpix=3.2, npix_max = 56, mask sum = 41, frac = 0.729
[Tue Jul 17 22:15:04 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.14"
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10.csv
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10.csv
[Tue Jul 17 23:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 17 23:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:09:29 2012] Spatial fit model total counts = -2246.030000, observed total counts = 394.000000
[Tue Jul 17 23:09:29 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 23:09:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:09:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:09:29 2012] Assessing source extent using major
[Tue Jul 17 23:09:29 2012] Source does appear to be extended
[Tue Jul 17 23:09:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 01:36:30 2012] XMMSAS src. selection expression = ellipse(35168.421906, 41933.463104, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 01:36:30 2012] Writing source region out to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 18 01:36:30 2012] Extracting stamp from image fullrun_mos2_xmm0094310201_pi300-10000_cl_sm2.00.img.gz, (367, 445) - (442, 520)
[Wed Jul 18 01:36:30 2012] XMMSAS bgd. selection expression = annulus(35168.421906, 41933.463104, 1087.500000, 2175.000000, X, Y) && !ellipse(33277.681535, 40688.204742, 768.105858, 286.223046, 23.155704, X, Y)
[Wed Jul 18 01:36:30 2012] Writing fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7.gif
[Wed Jul 18 01:38:57 2012] Mean detx,y = (-2155.41, 16503.62) 
[Wed Jul 18 01:38:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 01:39:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 01:39:17 2012] Setting source spectrum file to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 18 01:39:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 18 02:10:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 02:10:52 2012] rmf not generated due to insufficient counts
[Wed Jul 18 02:20:01 2012] Updating aperture counts using extracted products
[Wed Jul 18 02:20:01 2012] Error reading totcts from fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 18 02:20:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 02:20:02 2012] Using photon index=1.80, rate=0.00289, arf fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src7.arf
[Wed Jul 18 02:20:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 02:20:02 2012] Updating source flux to 1.3e-13
[Wed Jul 18 02:20:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting