[Tue Jul 17 15:32:11 2012] Detection parameters:
  Position = (301.8, 239.3) = 22 17 38.77 0 9 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 10.9
  Background counts = 32.6
  Rate = 0.001 +/- 0.0002

[Tue Jul 17 15:32:11 2012] Off-axis axis estimate = 4.30'
[Tue Jul 17 18:22:12 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:22:12 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Tue Jul 17 18:22:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.532
[Tue Jul 17 18:22:12 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.58"
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32.csv
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32.csv
[Tue Jul 17 19:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jul 17 19:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jul 17 19:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 17 19:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:51 2012] Spatial fit model total counts = 553.464000, observed total counts = 550.000000
[Tue Jul 17 19:33:51 2012] Offset between fit and detection position for source 38 = 0.558163 pixels
[Tue Jul 17 19:33:51 2012] Warning, changing simple spatial fit ID from 32 to 9
[Tue Jul 17 19:33:51 2012] 558.470700 total counts/ 534.588000 bgd. counts: snr = 1.032937
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.558163 pixels
  Position = (302.0, 238.7) = 22 17 38.71 0 9 39.0
  Extent = 3.3 (2.1-5.2)", rotation angle = 0
  Source counts = 23.9 +/- 23.6
  Background counts = 534.6
  Rate = 0.0003 +/- 0.0003
  Deleting source due to low Poisson probability