[Tue Jul 17 15:32:10 2012] Detection parameters:
  Position = (276.8, 376.2) = 22 17 46.03 0 19 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 12.4
  Background counts = 35.1
  Rate = 0.001 +/- 0.0002

[Tue Jul 17 15:32:11 2012] Off-axis axis estimate = 5.85'
[Tue Jul 17 18:22:12 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:22:12 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue Jul 17 18:22:12 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.890
[Tue Jul 17 18:22:12 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.35"
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 19:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jul 17 19:33:22 2012] Fit fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Jul 17 19:33:51 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.456913 pixels away
[Tue Jul 17 19:33:51 2012] Spatial fit model total counts = 403.228000, observed total counts = 399.000000
[Tue Jul 17 19:33:51 2012] Offset between fit and detection position for source 17 = 0.204496 pixels
[Tue Jul 17 19:33:51 2012] 398.183600 total counts/ 366.313000 bgd. counts: snr = 1.665191
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.204496 pixels
  Position = (276.7, 376.0) = 22 17 46.06 0 19 36.2
  Extent = 3.1 (2.3-4.5)", rotation angle = 0
  Source counts = 31.9 +/- 20.0
  Background counts = 366.3
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability