[Tue Jul 17 15:32:10 2012] Detection parameters:
  Position = (442.3, 409.1) = 22 16 58.03 0 22 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 14.8
  Background counts = 29.7
  Rate = 0.001 +/- 0.0002

[Tue Jul 17 15:32:11 2012] Off-axis axis estimate = 13.16'
[Tue Jul 17 18:22:12 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:22:12 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Tue Jul 17 18:22:12 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Tue Jul 17 18:22:12 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.01"
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29.csv
[Tue Jul 17 19:33:21 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jul 17 19:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29.csv
[Tue Jul 17 19:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jul 17 19:33:22 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jul 17 19:33:22 2012] Fit fullrun_mos2_xmm0094310201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Jul 17 19:33:51 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.347463 pixels away
[Tue Jul 17 19:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 19:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 19:33:51 2012] Assessing source extent using major
[Tue Jul 17 19:33:51 2012] Source does appear to be extended
[Tue Jul 17 19:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:15:04 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:15:04 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Tue Jul 17 22:15:04 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Tue Jul 17 22:15:04 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.01"
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28.csv
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jul 17 23:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28.csv
[Tue Jul 17 23:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jul 17 23:09:02 2012] fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jul 17 23:09:02 2012] Fit fullrun_mos2_xmm0094310201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jul 17 23:09:29 2012] Spatial fit model total counts = 404.544000, observed total counts = 405.000000
[Tue Jul 17 23:09:29 2012] Offset between fit and detection position for source 15 = 0.319983 pixels
[Tue Jul 17 23:09:29 2012] 402.135300 total counts/ 352.233000 bgd. counts: snr = 2.658922
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.319983 pixels
  Position = (442.1, 409.0) = 22 16 58.11 0 21 59.5
  Extent = 4.5 (3.4-6.4)", rotation angle = 0
  Source counts = 49.9 +/- 20.1
  Background counts = 352.2
  Rate = 0.0006 +/- 0.0003
[Tue Jul 17 23:09:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:09:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:09:29 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 23:09:29 2012] Source does appear to be extended
[Tue Jul 17 23:09:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 01:36:30 2012] XMMSAS src. selection expression = ellipse(38410.653560, 35532.610400, 272.157608, 272.157608, 0.000000, X, Y)
[Wed Jul 18 01:36:30 2012] Writing source region out to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15_src.reg
[Wed Jul 18 01:36:30 2012] Extracting stamp from image fullrun_mos2_xmm0094310201_pi300-10000_cl_sm2.00.img.gz, (426, 393) - (458, 425)
[Wed Jul 18 01:36:30 2012] XMMSAS bgd. selection expression = annulus(38410.653560, 35532.610400, 453.596013, 907.192026, X, Y)
[Wed Jul 18 01:36:30 2012] Writing fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15.gif
[Wed Jul 18 01:44:27 2012] Mean detx,y = (-7358.30, 11614.92) 
[Wed Jul 18 01:44:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 01:44:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 01:44:35 2012] Setting source spectrum file to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul 18 01:44:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jul 18 02:17:05 2012] Not generating rmf since there are only 49 counts
[Wed Jul 18 02:17:05 2012] rmf not generated due to insufficient counts
[Wed Jul 18 02:20:02 2012] Updating aperture counts using extracted products
[Wed Jul 18 02:20:02 2012] Error reading totcts from fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul 18 02:20:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 02:20:02 2012] Using photon index=1.80, rate=0.000626, arf fullrun_mos2_xmm0094310201_pi300-10000_pass1_cl_src15.arf
[Wed Jul 18 02:20:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 02:20:02 2012] Updating source flux to 2.4e-14
[Wed Jul 18 02:20:33 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting