[Thu Jul 19 10:28:33 2012] Detection parameters:
  Position = (431.0, 254.0) = 11 34 24.81 70 4 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.8 +/- 24.7
  Background counts = 24.5
  Rate = 0.03 +/- 0.002

[Thu Jul 19 10:28:34 2012] Off-axis axis estimate = 10.14'
[Thu Jul 19 10:32:05 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 10:32:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 10:32:05 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Thu Jul 19 10:32:05 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.911
[Thu Jul 19 10:32:05 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.50"
[Thu Jul 19 12:35:16 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 19 12:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 19 12:35:16 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 19 12:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 19 12:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 12:35:16 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 19 12:35:16 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 19 12:35:16 2012] Fit fullrun_pn_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul 19 18:05:17 2012] Spatial fit model total counts = 1234.680000, observed total counts = 1220.000000
[Thu Jul 19 18:05:17 2012] Offset between fit and detection position for source 2 = 2.650653 pixels
[Thu Jul 19 18:05:17 2012] Warning, changing simple spatial fit ID from 2 to 1
[Thu Jul 19 18:05:17 2012] 1212.650000 total counts/ 275.167000 bgd. counts: snr = 56.515195
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.650653 pixels
  Position = (428.4, 254.4) = 11 34 27.04 70 4 44.3
  Extent = 22.3 (22.2-44.5)", rotation angle = 0
  Source counts = 937.5 +/- 34.8
  Background counts = 275.2
  Rate = 0.1 +/- 0.004
[Thu Jul 19 18:05:17 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:17 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 18:05:17 2012] Source does appear to be extended
[Thu Jul 19 18:05:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:17 2012] Source is confused with source 1
[Thu Jul 19 18:05:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 18:05:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 18:05:43 2012] Initial guess for spatial extent in simple fitting = 22.27"
[Thu Jul 19 18:05:43 2012] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.958
[Thu Jul 19 18:05:43 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 22.27"
[Thu Jul 19 20:04:08 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 19 20:04:08 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 19 20:04:08 2012] Fit fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Jul 19 20:04:08 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 19 20:04:08 2012] fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 19 20:04:08 2012] Fit fullrun_pn_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul 19 22:56:27 2012] Spatial fit model total counts = 1943.230000, observed total counts = 1869.000000
[Thu Jul 19 22:56:27 2012] Offset between fit and detection position for source 2 = 2.389392 pixels
[Thu Jul 19 22:56:27 2012] 1941.396000 total counts/ 925.396000 bgd. counts: snr = 33.398726
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.389392 pixels
  Position = (426.4, 255.7) = 11 34 28.72 70 4 50.2
  Extent = 44.5" x 5.7", rotation angle = 25
  Source counts = 1016.0 +/- 44.1
  Background counts = 925.4
  Rate = 0.1 +/- 0.005
[Thu Jul 19 22:56:27 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:27 2012] Assessing source extent using major
[Thu Jul 19 22:56:27 2012] Source does appear to be extended
[Thu Jul 19 22:56:27 2012] Computing asymmetry using major and minor axis, asym = 7.77
[Thu Jul 19 22:56:27 2012] Source is asymmetric
[Thu Jul 19 22:56:47 2012] Counts = 1016.000000, rescaling region sizes by 2.000000
[Thu Jul 19 22:56:47 2012] XMMSAS src. selection expression = ellipse(37046.293421, 22198.352378, 5345.952154, 688.224446, 24.608798, X, Y)
[Thu Jul 19 22:56:47 2012] Writing source region out to fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 19 22:56:47 2012] Extracting stamp from image fullrun_pn_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (119, 0) - (595, 563)
[Thu Jul 19 22:56:47 2012] XMMSAS bgd. selection expression = annulus(37046.293421, 22198.352378, 17819.840513, 35639.681026, X, Y) && !ellipse(36652.145203, 22388.318909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38028.953125, 21796.527481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25027.546600, 27687.742000, 1549.224045, 1549.224045, 0.000000, X, Y) && !ellipse(23153.633759, 13227.717789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.842000, 26322.272000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(28664.525180, 26031.787946, 1257.888036, 398.354854, 28.114984, X, Y) && !ellipse(29416.674400, 25691.739600, 1257.888036, 426.262412, 24.232000, X, Y) && !ellipse(29317.170000, 25802.520000, 1286.480037, 1286.480037, 0.000000, X, Y) && !ellipse(13497.204590, 25637.915466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.708978, 25300.154176, 1354.024039, 420.581715, 24.072718, X, Y) && !ellipse(30615.919200, 25145.094400, 1354.024039, 394.596011, 23.674500, X, Y) && !ellipse(31029.428150, 24964.518718, 1424.568041, 391.644716, 25.271000, X, Y) && !ellipse(31455.048400, 24774.000200, 1812.008052, 428.934412, 26.483000, X, Y) && !ellipse(32513.858712, 24282.720644, 1517.576044, 450.891907, 26.239484, X, Y) && !ellipse(32860.862000, 23971.810000, 1517.576044, 1028.136030, 39.291800, X, Y) && !ellipse(33449.494000, 23816.378000, 1517.576044, 1517.576044, 0.000000, X, Y) && !ellipse(33996.468000, 23591.454000, 1634.416047, 1634.416047, 0.000000, X, Y) && !ellipse(34958.464000, 23131.302000, 3063.536088, 3063.536088, 0.000000, X, Y) && !ellipse(34975.658000, 23229.870000, 1534.312044, 1534.312044, 0.000000, X, Y) && !ellipse(36022.438000, 22754.608000, 1781.984051, 1781.984051, 0.000000, X, Y) && !ellipse(24929.192566, 22965.479797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.407074, 17363.978638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35485.814728, 35604.152039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.108032, 33027.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36396.229584, 29964.768921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28292.742981, 28456.744141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27679.892400, 26485.221800, 2255.056065, 495.533614, 27.968000, X, Y) && !ellipse(18444.892838, 37947.998627, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 22:56:47 2012] Writing fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2.gif
[Thu Jul 19 22:57:19 2012] Mean detx,y = (-163.87, 12844.20) 
[Thu Jul 19 22:57:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 23:06:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 23:06:17 2012] Setting source spectrum file to fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 19 23:06:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 20 01:59:06 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:06 2012] Error reading totcts from fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 01:59:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:06 2012] Using photon index=1.80, rate=0.122, arf fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 01:59:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:06 2012] Updating source flux to 5.6e-13
[Fri Jul 20 01:59:41 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul 20 02:01:18 2012] Reading fit data from xmm0094170101/analysis//spectral/fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 20 02:01:18 2012] Spectral fit parameter nH value = 1.56421e+17
[Fri Jul 20 02:01:18 2012] Spectral fit parameter PhoIndex value = 2.41021
[Fri Jul 20 02:01:18 2012] Failed to get F(0.3-8.0) from xmm0094170101/analysis//spectral/fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 02:01:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 02:01:18 2012] Using Nh = 1.6e+17, photon index=2.41, rate=0.122, arf fullrun_pn_xmm0094170101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 02:01:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 02:01:18 2012] Updating source flux to 3.9e-13