[Thu Jul 19 10:29:51 2012] Detection parameters:
  Position = (262.0, 494.8) = 11 36 49.08 70 22 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.0 +/- 9.0
  Background counts = 8.2
  Rate = 0.005 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 14.48'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 13.67"
[Thu Jul 19 12:51:45 2012] source mask rpix=3.1, npix_max = 53, mask sum = 54, frac = 1.018
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 13.67"
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64.csv
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64.csv
[Thu Jul 19 18:05:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jul 19 18:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 49.393500, observed total counts = 49.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 72 = 0.563845 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 64 to 20
[Thu Jul 19 18:05:33 2012] 47.982620 total counts/ 47.121800 bgd. counts: snr = 0.125401
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.563845 pixels
  Position = (261.5, 495.2) = 11 36 49.47 70 22 13.7
  Extent = 3.3 (3.3-4.1)", rotation angle = 0
  Source counts = 0.9 +/- 6.9
  Background counts = 47.1
  Rate = 0.0002 +/- 0.002
  Deleting source due to low Poisson probability