[Thu Jul 19 10:29:50 2012] Detection parameters:
  Position = (326.0, 199.9) = 11 35 54.20 70 0 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 9.8
  Background counts = 16.4
  Rate = 0.01 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 7.42'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.14"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 31.727100, observed total counts = 29.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 67 = 4.380958 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 4.380958 pixels
  Position = (321.9, 198.6) = 11 35 57.75 70 0 43.9
  Extent = 15.1 (11.3-17.9)", rotation angle = 0
  Source counts = 33.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.009 +/- 0.002
 Deleting source due to low signal-to-noise ratio