[Thu Jul 19 10:29:48 2012] Detection parameters:
  Position = (169.5, 259.9) = 11 38 7.40 70 5 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 13.1
  Background counts = 13.6
  Rate = 0.008 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 9.76'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.067
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.31"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jul 19 18:05:33 2012] Source 6 is offset by -0.881756 and -1.497547 pixels which is larger than
2 X fitted extent = 1.303628 x 1.303628, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 42.365300, observed total counts = 36.000000
[Thu Jul 19 18:05:33 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.067
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 11.31"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jul 19 22:56:18 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src16 appears to have run properly
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 16 centroid is now closest to src. 57
[Thu Jul 19 22:56:38 2012] Spatial fit model total counts = 38.733400, observed total counts = 36.000000
[Thu Jul 19 22:56:38 2012] Offset between fit and detection position for source 6 = 4.303541 pixels
[Thu Jul 19 22:56:38 2012] Warning, changing simple spatial fit ID from 16 to 53
[Thu Jul 19 22:56:38 2012] 41.989230 total counts/ 3.905530 bgd. counts: snr = 19.270773
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.303541 pixels
  Position = (173.7, 259.0) = 11 38 3.82 70 5 4.4
  Extent = 22.1 (22.1-22.1)", rotation angle = 0
  Source counts = 38.1 +/- 6.5
  Background counts = 3.9
  Rate = 0.01 +/- 0.002
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 22:56:38 2012] Source is confused with source 13
[Thu Jul 19 22:56:38 2012] Source is confused with source 57
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(15062.821000, 22481.172000, 1327.854038, 1327.854038, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (97, 183) - (250, 335)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(15062.821000, 22481.172000, 2213.090064, 4426.180127, X, Y) && !ellipse(17250.768188, 25003.182922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.850000, 23578.466000, 1475.112042, 1475.112042, 0.000000, X, Y) && !ellipse(20178.782288, 23430.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.010513, 26174.013672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13366.389969, 20101.402786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.335510, 24297.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20068.056946, 23781.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14371.114120, 21964.031952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.896362, 25311.333588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15082.389832, 23300.021454, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6.gif
[Fri Jul 20 01:12:19 2012] Mean detx,y = (8867.39, 7126.19) 
[Fri Jul 20 01:12:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:12:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:12:43 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 01:12:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 20 01:54:27 2012] Not generating rmf since there are only 38 counts
[Fri Jul 20 01:54:27 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 2e-13
[Fri Jul 20 01:59:21 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Fri Jul 20 01:59:21 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Fri Jul 20 01:59:21 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Fri Jul 20 01:59:21 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting