[Thu Jul 19 10:29:50 2012] Detection parameters: Position = (180.1, 277.3) = 11 37 58.44 70 6 23.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 38.8 +/- 9.1 Background counts = 14.7 Rate = 0.005 +/- 0.001 [Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 8.71' [Thu Jul 19 12:51:45 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting [Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 10.78" [Thu Jul 19 12:51:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014 [Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 10.78" [Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65.ximg exists [Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65.csv [Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65_1.ximg exists [Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65.csv [Thu Jul 19 18:05:08 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly [Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 43.894500, observed total counts = 40.000000 [Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 53 = 4.226017 pixels Spatial fit parameters: Offset between fit and detection position for source 53 = 4.226017 pixels Position = (183.2, 280.2) = 11 37 55.88 70 6 37.1 Extent = 19.8 (16.2-21.6)", rotation angle = 0 Source counts = 40.3 +/- 6.4 Background counts = 0.0 Rate = 0.01 +/- 0.002 Deleting source due to low signal-to-noise ratio