[Thu Jul 19 10:29:50 2012] Detection parameters:
  Position = (198.8, 288.0) = 11 37 42.55 70 7 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.9 +/- 10.5
  Background counts = 15.7
  Rate = 0.009 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 7.26'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.06"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul 19 18:05:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 13 centroid is now closest to src. 48
[Thu Jul 19 18:05:33 2012] Source 50 is offset by -1.613262 and -3.594196 pixels which is larger than
2 X fitted extent = 1.068069 x 1.068069, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.06"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jul 19 22:56:18 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src9 appears to have run properly
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 9 centroid is now closest to src. 48
[Thu Jul 19 22:56:38 2012] Source 50 is offset by -5.995975 and 4.752838 pixels which is larger than
2 X fitted extent = 1.100308 x 1.100308, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(17250.768188, 25003.182922, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (161, 250) - (236, 325)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(17250.768188, 25003.182922, 1087.500000, 2175.000000, X, Y) && !ellipse(18887.850000, 23578.466000, 1475.112042, 1475.112042, 0.000000, X, Y) && !ellipse(15062.821000, 22481.172000, 1770.472051, 1770.472051, 0.000000, X, Y) && !ellipse(20178.782288, 23430.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.010513, 26174.013672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.335510, 24297.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20068.056946, 23781.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14371.114120, 21964.031952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.896362, 25311.333588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15082.389832, 23300.021454, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50.gif
[Fri Jul 20 01:09:43 2012] Mean detx,y = (5728.21, 5898.75) 
[Fri Jul 20 01:09:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:10:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:10:00 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul 20 01:10:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Jul 20 01:53:26 2012] Not generating rmf since there are only 44 counts
[Fri Jul 20 01:53:26 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00936, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src50.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 1.6e-13
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting