[Thu Jul 19 10:29:48 2012] Detection parameters: Position = (268.6, 474.8) = 11 36 43.35 70 20 43.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 72.9 +/- 11.5 Background counts = 5.7 Rate = 0.009 +/- 0.001 [Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 12.97' [Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting [Thu Jul 19 12:51:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.91" [Thu Jul 19 12:51:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018 [Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.91" [Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14.ximg exists [Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14.csv [Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14_1.ximg exists [Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14.csv [Thu Jul 19 18:05:07 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly [Thu Jul 19 18:05:33 2012] Warning, spatial fit 14 centroid is now closest to src. 15 [Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 47.683100, observed total counts = 40.000000 [Thu Jul 19 18:05:33 2012] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 43.842700, observed total counts = 45.000000 [Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 5 = 3.340273 pixels [Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 14 to 21 [Thu Jul 19 18:05:33 2012] 37.511500 total counts/ 26.003400 bgd. counts: snr = 2.256777 Spatial fit parameters: Offset between fit and detection position for source 5 = 3.340273 pixels Position = (271.6, 476.2) = 11 36 40.76 70 20 51.3 Extent = 24.3 (22.6-25.2)", rotation angle = 0 Source counts = 11.5 +/- 6.1 Background counts = 26.0 Rate = 0.003 +/- 0.002 [Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000 [Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 19 18:05:33 2012] Assessing source extent using major axis lower bound [Thu Jul 19 18:05:33 2012] Source does appear to be extended [Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 19 18:05:33 2012] Deleting source due to low Poisson probability 0.8