[Thu Jul 19 10:29:50 2012] Detection parameters:
  Position = (307.9, 163.8) = 11 36 9.62 69 58 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.4 +/- 10.4
  Background counts = 12.2
  Rate = 0.006 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 9.78'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 11.32"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Jul 19 18:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 47 centroid is now closest to src. 29
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 27.611000, observed total counts = 29.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 49 = 1.103949 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 47 to 55
[Thu Jul 19 18:05:33 2012] 24.104120 total counts/ 20.212400 bgd. counts: snr = 0.865631
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.103949 pixels
  Position = (307.1, 164.6) = 11 36 10.30 69 58 15.9
  Extent = 8.8 (6.8-17.5)", rotation angle = 0
  Source counts = 3.9 +/- 4.9
  Background counts = 20.2
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability