[Thu Jul 19 10:29:50 2012] Detection parameters:
  Position = (212.0, 291.5) = 11 37 31.36 70 7 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 9.9
  Background counts = 18.1
  Rate = 0.006 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 6.29'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.57"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu Jul 19 18:05:33 2012] Source 48 is offset by 2.751781 and -9.366502 pixels which is larger than
2 X fitted extent = 11.872644 x 1.488293, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Source 48 is offset by -4.320203 and -6.148327 pixels which is larger than
2 X fitted extent = 1.053214 x 1.053214, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.799901 pixels away
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.57"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jul 19 22:56:20 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 10.659404 pixels away
[Thu Jul 19 22:56:38 2012] Source 48 is offset by -2.592708 and -2.081936 pixels which is larger than
2 X fitted extent = 1.053214 x 1.053214, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 37 centroid is now closest to src. 50
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(18393.896362, 25311.333588, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (174, 254) - (249, 329)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(18393.896362, 25311.333588, 1087.500000, 2175.000000, X, Y) && !ellipse(17250.768188, 25003.182922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.850000, 23578.466000, 1475.112042, 1475.112042, 0.000000, X, Y) && !ellipse(15062.821000, 22481.172000, 1770.472051, 1770.472051, 0.000000, X, Y) && !ellipse(20178.782288, 23430.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.010513, 26174.013672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.335510, 24297.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20068.056946, 23781.479156, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48.gif
[Fri Jul 20 01:17:26 2012] Mean detx,y = (4859.52, 4927.26) 
[Fri Jul 20 01:17:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:17:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:17:39 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Jul 20 01:17:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Fri Jul 20 01:56:33 2012] Not generating rmf since there are only 35 counts
[Fri Jul 20 01:56:33 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00648, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src48.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 9.7e-14
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting