[Thu Jul 19 10:29:50 2012] Detection parameters:
  Position = (295.0, 326.4) = 11 36 20.57 70 10 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.8 +/- 18.7
  Background counts = 42.7
  Rate = 0.01 +/- 0.003

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 2.05'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Jul 19 12:51:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.45"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jul 19 18:05:07 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 4 centroid is now closest to src. 43
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 2009.760000, observed total counts = 1993.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 45 = 7.142721 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 4 to 8
[Thu Jul 19 18:05:33 2012] 1150.817979 total counts/ 0.197979 bgd. counts: snr = 2585.963291
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 7.142721 pixels
  Position = (296.9, 333.3) = 11 36 18.97 70 10 29.9
  Extent = 15.1 (15.1-30.3)", rotation angle = 0
  Source counts = 1150.6 +/- 33.9
  Background counts = 0.2
  Rate = 0.3 +/- 0.009
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Source is confused with source 43
[Thu Jul 19 20:06:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 15.13"
[Thu Jul 19 20:06:28 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.011
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 15.13"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 19 22:56:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 19 22:56:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jul 19 22:56:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 2 centroid is now closest to src. 46
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] Counts = 1150.620000, rescaling region sizes by 2.000000
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(25778.108000, 28950.906000, 1815.828052, 1815.828052, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (192, 229) - (401, 438)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(25778.108000, 28950.906000, 6052.760174, 12105.520348, X, Y) && !ellipse(25030.698400, 27679.378800, 549.795216, 549.795216, 0.000000, X, Y) && !ellipse(35837.059174, 34031.413574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26432.502014, 27959.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21689.285538, 37461.254761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25207.171478, 28551.695953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.380737, 22990.243256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36267.845642, 34007.712128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.622200, 19878.647400, 1427.048041, 809.048023, 0.000000, X, Y) && !ellipse(17250.768188, 25003.182922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.734619, 18115.626724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.850000, 23578.466000, 1475.112042, 1475.112042, 0.000000, X, Y) && !ellipse(21589.264800, 41985.814000, 2002.680058, 2002.680058, 0.000000, X, Y) && !ellipse(22866.577301, 40394.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15062.821000, 22481.172000, 1770.472051, 1770.472051, 0.000000, X, Y) && !ellipse(20178.782288, 23430.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32322.543793, 31066.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29133.261536, 32315.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.010513, 26174.013672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24272.630371, 28980.023865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13366.389969, 20101.402786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30240.244141, 20918.119003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.335510, 24297.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20068.056946, 23781.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.174042, 21008.679398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22512.746857, 41109.307495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.179855, 41435.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.295944, 40227.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28464.645508, 32789.483795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14371.114120, 21964.031952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.896362, 25311.333588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.863556, 33659.112091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37173.826599, 36044.714325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21665.153976, 38594.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.000000, 41359.360809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.433197, 41806.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.682678, 16472.977356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.568420, 32609.727692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.996323, 39678.674164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21529.892181, 40920.667664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15082.389832, 23300.021454, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45.gif
[Fri Jul 20 01:04:10 2012] Mean detx,y = (-146.76, -107.10) 
[Fri Jul 20 01:04:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:07:31 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:07:31 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Jul 20 01:07:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Jul 20 01:59:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:07 2012] Using photon index=1.80, rate=0.305, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src45.arf
[Fri Jul 20 01:59:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:07 2012] Updating source flux to 2.6e-12
[Fri Jul 20 01:59:21 2012] Flag c found in src. 45 procflags, skipping spectral fitting