[Thu Jul 19 10:29:48 2012] Detection parameters:
  Position = (250.9, 483.9) = 11 36 58.59 70 21 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.5 +/- 12.2
  Background counts = 10.9
  Rate = 0.009 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 13.88'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 13.37"
[Thu Jul 19 12:51:45 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.096
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.37"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 20 centroid is now closest to src. 72
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Source is confused with source 10
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 13.37"
[Thu Jul 19 20:06:28 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.096
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.37"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.874981 pixels away
[Thu Jul 19 22:56:38 2012] Spatial fit model total counts = 47.817800, observed total counts = 47.000000
[Thu Jul 19 22:56:38 2012] Offset between fit and detection position for source 4 = 2.358895 pixels
[Thu Jul 19 22:56:38 2012] Warning, changing simple spatial fit ID from 14 to 33
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.358895 pixels
  Position = (248.7, 483.2) = 11 37 0.52 70 21 21.3
  Extent = 25.0 (22.6-26.2)", rotation angle = 0
  Source counts = 33.3 +/- 5.8
  Background counts = 0.0
  Rate = 0.009 +/- 0.002
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(21589.264800, 41985.814000, 1502.010043, 1502.010043, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (162, 397) - (335, 569)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(21589.264800, 41985.814000, 2503.350072, 5006.700144, X, Y) && !ellipse(21689.285538, 37461.254761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.834290, 41976.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22866.577301, 40394.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22512.746857, 41109.307495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.738525, 42492.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.179855, 41435.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.295944, 40227.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22088.373611, 43273.384705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21665.153976, 38594.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.000000, 41359.360809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.433197, 41806.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.996323, 39678.674164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21529.892181, 40920.667664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4.gif
[Fri Jul 20 01:11:17 2012] Mean detx,y = (-11598.91, 9053.50) 
[Fri Jul 20 01:11:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:12:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:12:01 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 01:12:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 20 01:54:13 2012] Not generating rmf since there are only 33 counts
[Fri Jul 20 01:54:13 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00882, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src4.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 1.8e-13
[Fri Jul 20 01:59:21 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Jul 20 01:59:21 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting