[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (327.7, 377.4) = 11 35 52.50 70 13 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.1 +/- 10.1
  Background counts = 19.3
  Rate = 0.007 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 6.11'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.48"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jul 19 18:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Source 38 is offset by 1.393351 and -4.207956 pixels which is larger than
2 X fitted extent = 1.082009 x 1.082009, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.909998 pixels away
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 9.48"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Jul 19 22:56:20 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Jul 19 22:56:38 2012] Source 38 is offset by 1.393351 and -4.207956 pixels which is larger than
2 X fitted extent = 1.082009 x 1.082009, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 35 centroid is now closest to src. 37
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(28464.645508, 32789.483795, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (290, 340) - (365, 415)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(28464.645508, 32789.483795, 1087.500000, 2175.000000, X, Y) && !ellipse(29133.261536, 32315.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.863556, 33659.112091, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38.gif
[Fri Jul 20 01:16:54 2012] Mean detx,y = (-6088.13, -1180.00) 
[Fri Jul 20 01:16:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:17:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:17:09 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jul 20 01:17:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Jul 20 01:56:16 2012] Not generating rmf since there are only 42 counts
[Fri Jul 20 01:56:16 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00673, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src38.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 8.3e-14
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting