[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (412.5, 391.7) = 11 34 39.77 70 14 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.3 +/- 10.9
  Background counts = 17.7
  Rate = 0.01 +/- 0.003

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 10.68'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.973
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.77"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 5 centroid is now closest to src. 33
[Thu Jul 19 18:05:33 2012] Source 36 is offset by -1.793859 and -8.803568 pixels which is larger than
2 X fitted extent = 2.634405 x 2.634405, not incorporating fit results
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Source is confused with source 35
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.973
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.77"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 3 centroid is now closest to src. 35
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(35837.059174, 34031.413574, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (375, 354) - (450, 429)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(35837.059174, 34031.413574, 1087.500000, 2175.000000, X, Y) && !ellipse(36267.845642, 34007.712128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37173.826599, 36044.714325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.568420, 32609.727692, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36.gif
[Fri Jul 20 01:07:33 2012] Mean detx,y = (-10415.04, -7259.16) 
[Fri Jul 20 01:07:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:07:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:07:41 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jul 20 01:07:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Jul 20 01:52:13 2012] Not generating rmf since there are only 51 counts
[Fri Jul 20 01:52:13 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jul 20 01:59:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:07 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src36.arf
[Fri Jul 20 01:59:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:07 2012] Updating source flux to 2.4e-13
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting