[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (417.4, 391.5) = 11 34 35.52 70 14 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 10.0
  Background counts = 19.9
  Rate = 0.009 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 10.95'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.170
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.90"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 11 centroid is now closest to src. 2
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Source is confused with source 36
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.170
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.90"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 12.585895 pixels away
[Thu Jul 19 22:56:38 2012] Source 35 is offset by -2.810602 and 8.391703 pixels which is larger than
2 X fitted extent = 6.199678 x 6.199678, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(36267.845642, 34007.712128, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (380, 354) - (455, 429)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(36267.845642, 34007.712128, 1087.500000, 2175.000000, X, Y) && !ellipse(35837.059174, 34031.413574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37173.826599, 36044.714325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.568420, 32609.727692, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35.gif
[Fri Jul 20 01:08:42 2012] Mean detx,y = (-10468.23, -7448.81) 
[Fri Jul 20 01:08:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:08:57 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:08:58 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jul 20 01:08:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Jul 20 01:52:55 2012] Not generating rmf since there are only 38 counts
[Fri Jul 20 01:52:55 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jul 20 01:59:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00946, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src35.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 1.8e-13
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting