[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (422.1, 411.3) = 11 34 31.43 70 16 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.1 +/- 10.1
  Background counts = 15.0
  Rate = 0.006 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 12.14'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.923
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 12.50"
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53.csv
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53.csv
[Thu Jul 19 18:05:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Jul 19 18:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 29.509600, observed total counts = 31.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 33 = 8.493975 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 53 to 5
[Thu Jul 19 18:05:33 2012] 30.353113 total counts/ 30.353100 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 8.493975 pixels
  Position = (422.8, 402.8) = 11 34 30.83 70 15 30.2
  Extent = 23.5 (2.9-44.1)", rotation angle = 0
  Source counts = 0.0 +/- 5.5
  Background counts = 30.4
  Rate = 4e-09 +/- 0.001
  Deleting source due to low Poisson probability