[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (253.2, 438.0) = 11 36 56.54 70 18 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.9 +/- 11.0
  Background counts = 13.7
  Rate = 0.01 +/- 0.003

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 10.64'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.75"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 42.382100, observed total counts = 42.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 30 = 1.122542 pixels
[Thu Jul 19 18:05:33 2012] 24.222400 total counts/ 11.897100 bgd. counts: snr = 3.573361
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.122542 pixels
  Position = (253.4, 436.9) = 11 36 56.39 70 18 0.2
  Extent = 8.0 (4.6-15.2)", rotation angle = 0
  Source counts = 12.3 +/- 4.9
  Background counts = 11.9
  Rate = 0.003 +/- 0.001
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Deleting source due to low Poisson probability 0.8