[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (249.6, 444.2) = 11 36 59.66 70 18 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 10.7
  Background counts = 13.9
  Rate = 0.006 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 11.14'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.989
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 12.00"
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51.csv
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51.csv
[Thu Jul 19 18:05:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 51 centroid is now closest to src. 31
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Thu Jul 19 20:06:28 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.989
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 12.00"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jul 19 22:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jul 19 22:56:20 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jul 19 22:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jul 19 22:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 41 centroid is now closest to src. 31
[Thu Jul 19 22:56:38 2012] Source 27 is offset by 4.146230 and 0.124946 pixels which is larger than
2 X fitted extent = 3.457223 x 3.457223, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(21665.153976, 38594.182312, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (212, 407) - (287, 482)
[Fri Jul 20 01:03:48 2012] XMMSAS bgd. selection expression = annulus(21665.153976, 38594.182312, 1087.500000, 2175.000000, X, Y) && !ellipse(21689.285538, 37461.254761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21589.264800, 41985.814000, 2002.680058, 2002.680058, 0.000000, X, Y) && !ellipse(22866.577301, 40394.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22512.746857, 41109.307495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.179855, 41435.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.295944, 40227.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.000000, 41359.360809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.996323, 39678.674164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21529.892181, 40920.667664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:48 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27.gif
[Fri Jul 20 01:18:28 2012] Mean detx,y = (-8491.07, 7479.96) 
[Fri Jul 20 01:18:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:18:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:18:35 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jul 20 01:18:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Jul 20 01:57:18 2012] Not generating rmf since there are only 46 counts
[Fri Jul 20 01:57:18 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00583, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src27.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 1.1e-13
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting