[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (251.3, 458.0) = 11 36 58.21 70 19 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.1 +/- 9.8
  Background counts = 10.8
  Rate = 0.005 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 12.06'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.928
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 12.46"
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63.csv
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Jul 19 18:05:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63.csv
[Thu Jul 19 18:05:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 44.932200, observed total counts = 45.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 24 = 0.449456 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 63 to 42
[Thu Jul 19 18:05:33 2012] 39.528620 total counts/ 35.326800 bgd. counts: snr = 0.706944
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.449456 pixels
  Position = (251.3, 458.4) = 11 36 58.23 70 19 33.7
  Extent = 3.2 (3.2-5.1)", rotation angle = 0
  Source counts = 4.2 +/- 6.3
  Background counts = 35.3
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability